|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
(R) Z00607MA 0.8A TRIACS STANDARD MAIN FEATURES: Symbol IT(RMS) VDRM/VRRM IGT (Q1) Value 0.8 600 5 Unit A V mA G A2 A1 DESCRIPTION The Z00607MA is suitable for low power AC switching applications, such as fan speed, small light controllers... Thanks to low gate triggering current, it can be directly driven by microcontrollers. A1 G A2 TO-92 ABSOLUTE MAXIMUM RATINGS Symbol IT(RMS) ITSM Parameter RMS on-state current (full sine wave) Non repetitive surge peak on-state current (full cycle, Tj initial = 25C) I t Value for fusing Critical rate of rise of on-state current IG = 2 x IGT , tr 100 ns Peak gate current Average gate power dissipation Storage junction temperature range Operating junction temperature range Value TI = 50C F = 50 Hz F = 60 Hz t = 20 ms t = 16.7 ms 0.8 9 9.5 0.45 20 1 0.1 - 40 to + 150 - 40 to + 110 Unit A A It dI/dt IGM PG(AV) Tstg Tj tp = 10 ms F = 120 Hz tp = 20 s Tj = 110C Tj = 110C Tj = 110C A s A/s A W C October 2001 - Ed: 4 1/5 Z00607MA ELECTRICAL CHARACTERISTICS (Tj = 25C, unless otherwise specified) Symbol IGT (1) VD = 12 V VGT VGD IH (2) IL dV/dt (2) (dV/dt)c (2) VD = VDRM IT = 200 mA IG = 1.2 IGT VD = 67 %VDRM gate open Tj = 110C (dI/dt)c = 0.35 A/ms Tj = 110C I - III - IV II MIN. MIN. RL = 3.3 k Tj = 110C Test Conditions RL = 30 Quadrant I - II - III IV ALL ALL MAX. MAX. MIN. MAX. MAX. Value 5 7 1.3 0.2 5 10 20 10 1.5 V/s V/s Unit mA V V mA mA STATIC CHARACTERISTICS Symbol VTM (2) Vto (2) Rd (2) IDRM IRRM Note 1: minimum IGT is guaranted at 5% of IGT max. Note 2: for both polarities of A2 referenced to A1 Test Conditions ITM = 1.1 A tp = 380 s Tj = 25C Tj = 110C Tj = 110C Tj = 25C Tj = 110C MAX. MAX. MAX. MAX. Value 1.5 0.95 420 5 0.1 Unit V V m A mA Threshold voltage Dynamic resistance VDRM = VRRM = 600 V THERMAL RESISTANCES Symbol Rth(j-l) Rth(j-a) Junction to lead (AC) Junction to ambient Parameter Value 60 150 Unit C/W C/W PRODUCT SELECTOR Part Number Z00607MA Voltage 600 V Sensitivity 5 mA Type Standard Package TO-92 ORDERING INFORMATION Z 006 07 TRIAC SERIES CURRENT: 0.8A MA VOLTAGE: M: 600V Blank 1BA2 PACKING MODE: 1BA2: Bulk 2BL2: Ammopack PACKAGE: A: TO-92 SENSITIVITY: 07: 5mA 2/5 Z00607MA OTHER INFORMATION Part Number Z00607MA 1BA2 Z00607MA 2BL2 Z00607MA Z00607MA Marking Weight 0.2 g 0.2 g Base quantity 2500 2500 Packing mode Bulk Ammopack Fig. 1: Maximum power dissipation versus RMS on-state current (full cycle). P(W) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 0.0 0.1 Fig. 2: RMS on-state current versus ambient temperature (full cycle). IT(RMS)(A) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 Rth(j-a)=Rth(j-l) Rth(j-a)=150C/W IT(RMS)(A) 0.2 0.3 0.4 0.5 0.6 0.7 0.8 Tamb(C) 0 10 20 30 40 50 60 70 80 90 100 110 Fig. 3: Relative variation of thermal impedance junction to ambient versus pulse duration. Fig. 4: Relative variation of gate trigger current, holding current and latching current versus junction temperature (typical values). IGT,IH,IL [Tj] / IGT,IH,IL [Tj=25C] 2.5 2.0 1.5 IGT K=[Zth(j-a)/Rth(j-a)] 1.00 0.10 IH & IL 1.0 0.5 tp(s) Tj(C) 0.01 1E-3 1E-2 1E-1 1E+0 1E+1 1E+2 5E+2 0.0 -40 -20 0 20 40 60 80 100 120 3/5 Z00607MA Fig. 5: Surge peak on-state current versus number of cycles. Fig. 6: Non-repetitive surge peak on-state current for a sinusoidal pulse with width tp < 10ms, and corresponding value of It. ITSM (A), It (As) 200.0 100.0 Tj initial=25C dI/dt limitation: 20A/s ITSM(A) 10 9 8 7 6 5 4 3 2 1 0 t=20ms ITSM Non repetitive Tj initial=25C One cycle 10.0 Repetitive Tamb=25C 1.0 It Number of cycles tp (ms) 1 10 100 1000 0.1 0.01 0.10 1.00 10.00 Fig. 7: values). On-state characteristics (maximum Fig. 8: Relative variation of critical rate of decrease of main current versus (dV/dt)c (typical values). (dI/dt)c [(dV/dt)c] / Specified (dI/dt)c 10.0 8.0 ITM(A) 10.0 Tj=Tj max. 6.0 4.0 Tj=25C Tj max. Vto= 0.95 V Rd= 420 m 1.0 2.0 (dV/dt)c (V/s) 0.0 0.1 VTM(V) 0.1 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 1.0 10.0 Fig. 9: Relative variation of critical rate of decrease of main current versus junction temperature. (dI/dt)c [Tj] / (dI/dt)c [Tj specified] 6 5 4 3 2 1 0 0 10 20 30 40 Tj (C) 50 60 70 80 90 100 110 4/5 Z00607MA PACKAGE MECHANICAL DATA TO-92 (Plastic) DIMENSIONS A a B C REF. Millimeters Min. Typ. 1.35 4.70 2.54 4.40 12.70 3.70 0.45 0.173 0.500 Max. Min. Inches Typ. 0.053 0.185 0.100 Max. F D E A B C D E F a 0.146 0.017 Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. (c) The ST logo is a registered trademark of STMicroelectronics (c) 2001 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - U.S.A http://www.st.com 5/5 |
Price & Availability of Z00607 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |