|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
(R) PX1004 82.2 MHz SAW Filter Value +10 30 -40 to +85 260C for 30 s Units dBm VDC C * * * * * * Designed for TDMA IS-54 / CDPD IF Applications Low Insertion Loss Excellent Selectivity Hermetic 13.3 X 6.5 mm Surface-Mount Case Unbalanced Input and Output Pb Complies with Directive 2002/95/EC (RoHS) Absolute Maximum Ratings Rating Maximum Incident Power in Passband Max. DC voltage between any 2 terminals Storage Temperature Range Suitable for lead-free soldering - Max Soldering Profile SM13365-12 Electrical Characteristics Characteristic Nominal Center Frequency Passband Insertion Loss at fc 3 dB Passband Amplitude Ripple over fc 15 kHz Group Delay Variation over fc 10 kHz Third-Order Intermod. for -20 dBm tones at fc 60 & 120 kHz Rejection fc 60 kHz fc -880 kHz to fc -940 kHz Ultimate Operating Temperature Range Impedance Matching to 50 unbalanced Case Style Lid Symbolization (YY=year, WW=week) See note 4 TA 1 -20 External L-C SM13365-12 13.3 X 6.5 mm Nominal Footprint RFM PX1004 YYWW 1, 2, 3 10 65 16 68 65 +70 C dB GDV Sym fC IL BW3 1, 2 Notes 1 15 Min Typ 82.200 3 25 1.0 2.5 6.0 -95 Max 4.0 Units MHz dB kHz dBP-P sP-P dBm Electrical Connections Connection Port 1Hot Port 1 Gnd Return Port 2 Hot Port 2 Gnd Return Case Ground Terminals 2 3 8 9 All Others Notes: 1. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 and measured with 50 network analyzer. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance matching design. See Application Note No. 42 for details. "LRIP" or "L" after the part number indicates "low rate initial production" and "ENG" or "E" indicates "engineering prototypes." The design, manufacturing process, and specifications of this filter are subject to change. 6. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that the filter must always be installed in one direction per the circuit design. US and international patents may apply. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc. (c)Copyright 1999, RF Monolithics Inc. Electrostatic Sensitive Device. Observe precautions for handling. 2. 3. 7. 8. 9. 10. 4. 5. RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 (c)1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: info@rfm.com http://www.rfm.com PX1004 112904 82.2 MHz SAW Filter RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 (c)1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: info@rfm.com http://www.rfm.com PX1004 112904 82.2 MHz Tape and Reel Specifications SAW Filter 100 REF. "B" REF. Quantity Per Reel 254 100 Min 1000 Max See Detail "A" 12.0 24.4 0 13. 21.0 .2 20 2.0 COMPONENT ORIENTATION and DIMENSIONS Carrier Tape Dimensions Ao Bo Ko Pitch W 7.0 mm 13.8 mm 2.0 mm 12.0 mm 24.0 mm PIN #1 USER DIRECTION OF FEED RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 (c)1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: info@rfm.com http://www.rfm.com PX1004 112904 82.2 MHz SAW Filter SM13365-12 Case 12-Terminal Ceramic Surface-Mount Case 13.3 x 6.5 mm Nominal Footprint Case Dimensions Dimension A B C D E H P Min 13.08 6.27 mm Nom 13.31 6.50 1.91 1.50 0.79 1.0 2.54 Max 13.60 6.80 2.00 Min 0.515 0.247 Inches Nom 0.524 0.256 0.075 0.059 0.031 0.039 0.100 Max 0.535 0.268 0.079 Materials Solder Pad Termination Lid Body Pb Free Au plating 30 - 60 uInches (76.2-152 uM) over 80200 uInches (203-508 uM) Ni. Fe-Ni-Co Alloy Electroless Nickel Plate (8-11% Phosphorus) 100-200 uInches Thick Al2O3 Ceramic Port 1 Port 2 Electrical Connections Connection Input or Return Return or Input Output or Return Return or Output Ground Single Ended Operation Differential Operation Terminals 2 3 8 9 All others Return is ground Return is hot B 3 2 C H 2 3 D 4 1 1 4 P (8 Places) 5 A 6 12 12 5 11 11 6 E (10 Places) 7 10 10 7 8 9 9 8 TOP VIEW BOTTOM VIEW RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 (c)1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: info@rfm.com http://www.rfm.com PX1004 112904 |
Price & Availability of PX1004 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |