![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
FAST CMOS 16-BIT TRANSPARENT LATCHES Integrated Device Technology, Inc. IDT54/74FCT16373T/AT/CT/ET IDT54/74FCT162373T/AT/CT/ET FEATURES: * Common features: - 0.5 MICRON CMOS Technology - High-speed, low-power CMOS replacement for ABT functions - Typical tSK(o) (Output Skew) < 250ps - Low input and output leakage 1A (max.) - ESD > 2000V per MIL-STD-883, Method 3015; > 200V using machine model (C = 200pF, R = 0) - Packages include 25 mil pitch SSOP, 19.6 mil pitch TSSOP,15.7 mil pitch TVSOP and 25 mil pitch Cerpack - Extended commercial range of -40C to +85C - VCC = 5V 10% * Features for FCT16373T/AT/CT/ET: - High drive outputs (-32mA IOH, 64mA IOL) - Power off disable outputs permit "live insertion" - Typical VOLP (Output Ground Bounce) < 1.0V at VCC = 5V, TA = 25C * Features for FCT162373T/AT/CT/ET: - Balanced Output Drivers: 24mA (commercial), 16mA (military) - Reduced system switching noise - Typical VOLP (Output Ground Bounce) < 0.6V at VCC = 5V,TA = 25C DESCRIPTION: The FCT16373T/AT/CT/ET and FCT162373T/AT/CT/ET 16-bit transparent D-type latches are built using advanced dual metal CMOS technology. These high-speed, low-power latches are ideal for temporary storage of data. They can be used for implementing memory address latches, I/O ports, and bus drivers. The Output Enable and Latch Enable controls are organized to operate each device as two 8-bit latches, or one 16-bit latch. Flow-through organization of signal pins simplifies layout. All inputs are designed with hysteresis for improved noise margin. The FCT16373T/AT/CT/ET are ideally suited for driving high-capacitance loads and low-impedance backplanes. The output buffers are designed with power off disable capability to allow "live insertion" of boards when used as backplane drivers. The FCT162373T/AT/CT/ET have balanced output drive with current limiting resistors. This offers low ground bounce, minimal undershoot, and controlled output fall times- reducing the need for external series terminating resistors. The FCT162373T/AT/CT/ET are plug-in replacements for the FCT16373T/AT/CT/ET and ABT16373 for on-board interface applications. FUNCTIONAL BLOCK DIAGRAM 1OE 2OE 1LE 1D1 2LE D 1O1 2D1 D 2O1 C C TO 7 OTHER CHANNELS 2543 drw 01 TO 7 OTHER CHANNELS 2543 drw 02 The IDT logo is a registered trademark of Integrated Device Technology, Inc. MILITARY AND COMMERCIAL TEMPERATURE RANGES (c)1996 Integrated Device Technology, Inc. AUGUST 1996 DSC-4229/9 5.7 1 IDT54/74FCT16373T/AT/CT/ET, 162373T/AT/CT/ET FAST CMOS 16-BIT TRANSPARENT LATCHES MILITARY AND COMMERCIAL TEMPERATURE RANGES PIN CONFIGURATIONS 1OE 1O1 1O2 1 2 3 4 5 6 7 8 9 10 11 12 SO48-1 SO48-2 13 SO48-3 14 15 16 17 18 19 20 21 22 23 24 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 1LE 1D1 1D2 1OE 1O1 1O2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 E48-1 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 2543 drw 04 1LE 1D1 1D2 GND 1O3 1O4 GND 1D3 1D4 GND 1O3 1O4 GND 1D3 1D4 VCC 1O5 1O6 VCC 1D5 1D6 VCC 1O5 1O6 VCC 1D5 1D6 GND 1O7 1O8 2O1 2O2 GND 1D7 1D8 2D1 2D2 GND 1O7 1O8 2O1 2O2 GND 1D7 1D8 2D1 2D2 GND 2O3 2O4 GND 2D3 2D4 GND 2O3 2O4 GND 2D3 2D4 VCC 2O5 2O6 VCC 2D5 2D6 VCC 2O5 2O6 VCC 2D5 2D6 GND 2O7 2O8 2OE GND 2D7 2D8 2LE GND 2O7 2O8 2OE 2543 drw 03 GND 2D7 2D8 2LE SSOP/ TSSOP/TVSOP TOP VIEW CERPACK TOP VIEW 5.7 2 IDT54/74FCT16373T/AT/CT/ET, 162373T/AT/CT/ET FAST CMOS 16-BIT TRANSPARENT LATCHES MILITARY AND COMMERCIAL TEMPERATURE RANGES PIN DESCRIPTION Pin Names xDx xLE xOE xOx Description Data Inputs Latch Enable Input (Active HIGH) Output Enable Input (Active LOW) 3-State Outputs 2543 tbl 01 FUNCTION TABLE(1) xDx H L X NOTE: 1. H = HIGH voltage level L = LOW voltage level X = Don't care Z = High-impedance Inputs xLE H H X xOE OE L L H Outputs xOx H L Z 2543 tbl 02 ABSOLUTE MAXIMUM RATINGS(1) Symbol Description Max. VTERM(2) Terminal Voltage with Respect to -0.5 to +7.0 GND VTERM(3) Terminal Voltage with Respect to -0.5 to GND VCC +0.5 TSTG Storage Temperature -65 to +150 IOUT DC Output Current -60 to +120 Unit V V C mA 2543 lnk 03 CAPACITANCE (TA = +25C, f = 1.0MHz) Symbol Parameter(1) CIN Input Capacitance COUT Output Capacitance Conditions VIN = 0V VOUT = 0V Typ. 3.5 3.5 Max. Unit 6.0 pF 8.0 pF 2543 lnk 04 NOTE: 1. This parameter is measured at characterization but not tested. NOTES: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. 2. All device terminals except FCT162XXXT Output and I/O terminals. 3. Output and I/O terminals for FCT162XXXT. 5.7 3 IDT54/74FCT16373T/AT/CT/ET, 162373T/AT/CT/ET FAST CMOS 16-BIT TRANSPARENT LATCHES MILITARY AND COMMERCIAL TEMPERATURE RANGES DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE Following Conditions Apply Unless Otherwise Specified: Commercial: TA = -40C to +85C, VCC = 5.0V 10%; Military: TA = -55C to +125C, VCC = 5.0V 10% Symbol VIH VIL II H II L IOZH IOZL VIK IOS VH ICCL ICCH ICCZ Parameter Input HIGH Level Input LOW Level Input HIGH Current (Input pins)(5) Input HIGH Current (I/O pins)(5) Input LOW Current (Input pins)(5) VCC = Max. VCC = Min., IIN = -18mA VCC = Max., VO = GND (3) -- Test Conditions(1) Guaranteed Logic HIGH Level Guaranteed Logic LOW Level VCC = Max. VI = VCC VI = GND VO = 2.7V VO = 0.5V Min. 2.0 -- -- -- -- -- -- -- -- -80 -- -- Typ.(2) -- -- -- -- -- -- -- -- -0.7 -140 Max. -- Unit V V A 0.8 1 1 1 1 1 1 -1.2 -225 -- Input LOW Current (I/O pins)(5) High Impedance Output Current (3-State Output pins) (5) Clamp Diode Voltage Short Circuit Current Input Hysteresis Quiescent Power Supply Current A V mA mV A 100 5 VCC = Max., VIN = GND or VCC 500 2543 lnk 05 OUTPUT DRIVE CHARACTERISTICS FOR FCT16373T Symbol IO VOH Parameter Output Drive Current Output HIGH Voltage Test Conditions(1) VCC = Max., VO = 2.5V(3) VCC = Min. VIN = VIH or VIL IOH = -3mA IOH = -12mA MIL. IOH = -15mA COM'L. IOH = -24mA MIL. IOH = -32mA COM'L.(4) VCC = Min. IOL = 48mA MIL. VIN = VIH or VIL IOL = 64mA COM'L. VCC = 0V, VIN or VO 4.5V Min. -50 2.5 2.4 2.0 -- -- Typ.(2) -- Max. -180 Unit mA V V V V 3.5 3.5 3.0 0.2 -- -- -- -- 0.55 VOL IOFF Output LOW Voltage Input/Output Power Off Leakage(5) 1 A 2543 lnk 06 OUTPUT DRIVE CHARACTERISTICS FOR FCT162373T Symbol IODL IODH VOH VOL Parameter Output LOW Current Output HIGH Current Output HIGH Voltage Output LOW Voltage Test Conditions(1) VCC = 5V, VIN = VIH or VIL, VOUT = 1.5V (3) VCC = 5V, VIN = VIH or VIL, VOUT = 1.5V(3) VCC = Min. VIN = VIH or VIL VCC = Min. VIN = VIH or VIL IOH = -16mA MIL. IOH = -24mA COM'L. IOL = 16mA MIL. IOL = 24mA COM'L. Min. 60 -60 2.4 -- Typ.(2) 115 -115 3.3 0.3 Max. 200 -200 -- 0.55 Unit mA mA V V 2543 lnk 07 NOTES: 1. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type. 2. Typical values are at Vcc = 5.0V, +25C ambient. 3. Not more than one output should be tested at one time. Duration of the test should not exceed one second. 4. Duration of the condition can not exceed one second. 5. The test limit for this parameter is 5A at TA = -55C. 5.7 4 IDT54/74FCT16373T/AT/CT/ET, 162373T/AT/CT/ET FAST CMOS 16-BIT TRANSPARENT LATCHES MILITARY AND COMMERCIAL TEMPERATURE RANGES POWER SUPPLY CHARACTERISTICS Symbol ICC ICCD Parameter Quiescent Power Supply Current TTL Inputs HIGH Dynamic Power Supply Current(4) VCC = Max. VIN = 3.4V(3) VCC = Max. Outputs Open xOE = GND One Input Toggling 50% Duty Cycle VCC = Max. Outputs Open fi =10MHz 50% Duty Cycle xOE = GND xLE = VCC One Bit Toggling VCC = Max. Outputs Open fi = 2.5MHz 50% Duty Cycle xOE = GND xLE = VCC Sixteen Bits Toggling VIN = VCC VIN = GND Test Conditions(1) Min. -- -- Typ.(2) 0.5 60 Max. 1.5 100 Unit mA A/ MHz IC Total Power Supply Current (6) VIN = VCC VIN = GND VIN = 3.4V VIN = GND -- 0.6 1.5 mA -- 0.9 2.3 VIN = VCC VIN = GND VIN = 3.4V VIN = GND -- 2.4 4.5 (5) -- 6.4 16.5 (5) NOTES: 1. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type. 2. Typical values are at VCC = 5.0V, +25C ambient. 3. Per TTL driven input (VIN = 3.4V). All other inputs at VCC or GND. 4. This parameter is not directly testable, but is derived for use in Total Power Supply Calculations. 5. Values for these conditions are examples of the ICC formula. These limits are guaranteed but not tested. 6. IC = IQUIESCENT + IINPUTS + IDYNAMIC IC = ICC + ICC DHNT + ICCD (fCPNCP/2 + fiNi) ICC = Quiescent Current (ICCL, ICCH and ICCZ) ICC = Power Supply Current for a TTL High Input (VIN = 3.4V) DH = Duty Cycle for TTL Inputs High NT = Number of TTL Inputs at DH ICCD = Dynamic Current Caused by an Input Transition Pair (HLH or LHL) fCP = Clock Frequency for Register Devices (Zero for Non-Register Devices) NCP = Number of Clock Inputs at fCP fi = Input Frequency Ni = Number of Inputs at fi 2543 tbl 08 5.7 5 IDT54/74FCT16373T/AT/CT/ET, 162373T/AT/CT/ET FAST CMOS 16-BIT TRANSPARENT LATCHES MILITARY AND COMMERCIAL TEMPERATURE RANGES SWITCHING CHARACTERISTICS OVER OPERATING RANGE FCT16373T/162373T Com'l. Symbol Parameter Condition(1) Min.(2) Max. Mil. Min.(2) Max. FCT16373AT/162373AT Com'l. Min.(2) Max. Mil. Min.(2) Max. Unit tPLH tPHL tPLH tPHL tPZH tPZL tPHZ tPLZ tSU tH tW Propagation Delay xDx to xOx Propagation Delay xLE to xOx Output Enable Time Output Disable Time Set-up Time HIGH or LOW, xDx to xLE Hold Time HIGH or LOW, xDx to xLE xLE Pulse Width HIGH CL = 50pF RL = 500 1.5 2.0 1.5 1.5 2.0 1.5 6.0 -- 8.0 13.0 12.0 7.5 -- -- -- 0.5 1.5 2.0 1.5 1.5 2.0 1.5 6.0 -- 8.5 15.0 13.5 10.0 -- -- -- 0.5 1.5 2.0 1.5 1.5 2.0 1.5 5.0 -- 5.2 8.5 6.5 5.5 -- -- -- 0.5 1.5 2.0 1.5 1.5 2.0 1.5 6.0 -- 5.6 9.8 7.5 6.5 -- -- -- 0.5 ns ns ns ns ns ns ns ns tSK(o) Output Skew (3) FCT16373CT/162373CT Com'l. Symbol Parameter Condition(1) Min.(2) Max. Mil. Min.(2) Max. FCT16373ET/162373ET Com'l. Min.(2) Max. Mil. Min.(2) Max. Unit tPLH tPHL tPLH tPHL tPZH tPZL tPHZ tPLZ tSU tH tW Propagation Delay xDx to xOx Propagation Delay xLE to xOx Output Enable Time Output Disable Time Set-up Time HIGH or LOW, xDx to xLE Hold Time HIGH or LOW, xDx to xLE xLE Pulse Width HIGH CL = 50pF RL = 500 1.5 2.0 1.5 1.5 2.0 1.5 5.0 -- 4.2 5.5 5.5 5.0 -- -- -- 0.5 1.5 2.0 1.5 1.5 2.0 1.5 6.0 -- 5.1 8.0 6.3 5.9 -- -- -- 0.5 1.5 1.5 1.5 1.5 1.0 1.0 3.0 (4) -- 3.4 3.7 4.4 3.6 -- -- -- 0.5 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ns ns ns ns ns ns ns ns 2543 tbl 09 tSK(o) Output Skew (3) NOTES: 1. See test circuit and waveforms. 2. Minimum limits are guaranteed but not tested on Propagation Delays. 3. Skew between any two outputs of the same package switching in the same direction. This parameter is guaranteed by design. 4. This limit is guaranteed but not tested. 5.7 6 IDT54/74FCT16373T/AT/CT/ET, 162373T/AT/CT/ET FAST CMOS 16-BIT TRANSPARENT LATCHES MILITARY AND COMMERCIAL TEMPERATURE RANGES TEST CIRCUITS AND WAVEFORMS TEST CIRCUITS FOR ALL OUTPUTS V CC 500 VIN Pulse Generator RT D.U.T. 50pF CL 500 VOUT 7.0V SWITCH POSITION Test Open Drain Disable Low Enable Low All Other Tests Open 2543 lnk 10 DEFINITIONS: CL= Load capacitance: includes jig and probe capacitance. RT = Termination resistance: should be equal to ZOUT of the Pulse Generator. Switch Closed 2543 drw 05 SET-UP, HOLD AND RELEASE TIMES PULSE WIDTH DATA INPUT TIMING INPUT ASYNCHRONOUS CONTROL PRESET CLEAR ETC. SYNCHRONOUS CONTROL PRESET CLEAR CLOCK ENABLE ETC. tSU tH 3V 1.5V 0V 3V 1.5V 0V 3V 1.5V 0V 3V 1.5V 0V 2543 drw 06 LOW-HIGH-LOW PULSE tW HIGH-LOW-HIGH PULSE 1.5V tREM 1.5V 2543 drw 07 tSU tH PROPAGATION DELAY ENABLE AND DISABLE TIMES ENABLE DISABLE 3V 1.5V tPZL OUTPUT NORMALLY LOW OUTPUT NORMALLY HIGH SWITCH CLOSED tPZH SWITCH OPEN 1.5V 0V 3.5V 1.5V tPHZ 0.3V VOH 0V 2543 drw 09 SAME PHASE INPUT TRANSITION tPLH OUTPUT tPLH OPPOSITE PHASE INPUT TRANSITION tPHL tPHL 3V 1.5V 0V VOH 1.5V VOL 3V 1.5V 0V 2543 drw 08 CONTROL INPUT tPLZ 0V 3.5V 0.3V VOL NOTES: 1. Diagram shown for input Control Enable-LOW and input Control DisableHIGH 2. Pulse Generator for All Pulses: Rate 1.0MHz; tF 2.5ns; tR 2.5ns 5.7 7 IDT54/74FCT16373T/AT/CT/ET, 162373T/AT/CT/ET FAST CMOS 16-BIT TRANSPARENT LATCHES MILITARY AND COMMERCIAL TEMPERATURE RANGES ORDERING INFORMATION IDT XX FCT XXXX Temp. Range Device Type X Package X Process Blank B PV PA PF E Commercial MIL-STD-883, Class B Shrink Small Outline Package (SO48-1) Thin Shrink Small Outline Package (SO48-2) Thin Very Small Outline Package (SO48-3) CERPACK (E48-1) 16373T Non-Inverting 16-Bit Transparent Latch 16373AT 16373CT 16373ET 162373T 162373AT 162373CT 162373ET 54 74 -55C to +125C -40C to +85C 2543 drw 10 5.7 8 |
Price & Availability of IDT74FCT162373AT
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |