View MRFIC2408_240834.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Product Preview
MRFIC2408PP/D Rev. 0, 08/2002 2.4 GHz RF Power Amplifier for BluetoothTM Applications
MRFIC2408
(Scale 2:1)
Package Information Plastic Package Case 1408 (QFN-12) Ordering Information
Device PRFIC2408 Marking 2408 Package QFN-12
The MRFIC2408 is a single chip RF Power Amplifier intended for 2.4 GHz ISM Band applications. It can be used to implement BluetoothTM Class I operation and contains power control circuitry. * * * * Power Supply Range: 2.7 to 3.6 V Power Amplifier Enable/Disable Function Over 20 dB of Power Control Low Power Shutdown Mode
VCC1 VCC2
RFin
RFout
Bias
EN
VPC
Figure 1. Simplified Block Diagram
This document contains information on a product under development. Motorola reserves the right to change or discontinue this product without notice. (c) Motorola, Inc., 2002. All rights reserved.
Table 1. Maximum Ratings
Ratings Supply Voltage Storage Temperature Range Operating Case Temperature Range Input Signal (PA In)
NOTE:
Symbol VCC Tstg TC Pin
Value 6.0 -55 to 150 -40 to 110 5.0
Unit V C C dBm
Maximum Ratings are those values beyond which damage to the device may occur. Functional operation should be restricted to the limits in the Electrical Characteristics tables.
Table 2. Electrical Characteristics
(VCC = 3.0 V, RFin = 2.0 dBm, f = 2.45 GHz, TA = 25C) Characteristic Quiescent Current Conditions No RF, VEN = 3.0 V, VPC = 3.0 V No RF, VEN = 0 V, VPC = 3.0 V VEN = 3.0 V, VPC = 3.0 V VEN = 3.0 V, VPC = 3.0 V RFin = 2.0 dBm, VEN = 0 V, VPC = 3.0 V VEN = 3.0 V, VPC = 3.0 V Symbol ICCQ Min Typ 220 Max Unit mA
Shut-Off Current
ICCS
-
0.001
-
mA
Saturated Output Power
Pout
-
23
-
dBm
Power Gain
GP
-
21
-
dB
Disable Isolation
|S21|off
30
-
-
dB
Harmonics (2f, 3f, 4f)
fo
-
-
-25
dB
NOTE:
VEN = Enable Voltage and VPC = Power Control Voltage.
RFin 12 EN 1
VCC1 11
VPC 10 9 RFout/VCC2
Gnd
2
Gnd
8
RFout/VCC2
Gnd
3 4 Gnd 5 Gnd (Top View) 6 Gnd
7
Gnd
Figure 2. Pin Connections
2
MRFIC2408 Product Preview
MOTOROLA
PIN 1 INDEX AREA
3
2X
A G
M 0.1 C 1.0 1.00 0.8 0.75 (0.24) 0.05 0.00 (0.5) C DETAIL G
VIEW ROTATED 90 CLOCKWISE SEATING PLANE
0.1 C
0.05 C
3
4
2X
B
0.1 C
M
0.1 C A B
8X
1.25 0.95 0.1 0.05
12X M M
(0.565)
8X
DETAIL M PIN 1 INDEX EXPOSED DIE ATTACH PAD
(0.741)
CAB C
9
10
12
0.30 0.18
4X
1
(45)
1.25 0.95
7 3
0.1 C A B
12X
0.065 0.015
4X
(0.25) DETAIL N
N
6 4
CORNER CONFIGURATION
12X
0.65 0.40
8X
0.5
VIEW M-M
DETAIL S
(90) 0.39 0.31
NOTES: 1. DIMENSIONS ARE IN MILLIMETERS. 2. INTERPRET DIMENSIONS AND TOLERANCES PER ASME Y14.5M, 1994. 3. THE COMPLETE JEDEC DESIGNATOR FOR THIS PACKAGE IS: HF-PQFP-N. 4. COPLANARITY APPLIES TO LEADS, CORNER LEADS, AND DIE ATTACH PAD.
2X
2X
0.1 0.0
DETAIL M
PIN 1 BACKSIDE IDENTIFIER
DETAIL S
PIN 1 BACKSIDE IDENTIFIER
Figure 3. Outline Dimensions for QFN-12, 3x3 mm (Case 1408-01, Issue O)
MOTOROLA
MRFIC2408 Product Preview
3
HOW TO REACH US: USA/EUROPE/LOCATIONS NOT LISTED: Motorola Literature Distribution; P.O. Box 5405, Denver, Colorado 80217 1-303-675-2140 or 1-800-441-2447 JAPAN: Motorola Japan Ltd.; SPS, Technical Information Center, 3-20-1, Minami-Azabu Minato-ku, Tokyo 106-8573 Japan 81-3-3440-3569 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Centre, 2 Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong 852-26668334 TECHNICAL INFORMATION CENTER: 1-800-521-6274 HOME PAGE: http://www.motorola.com/semiconductors
Information in this document is provided solely to enable system and software implementers to use Motorola products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part.
Motorola and the Stylized M Logo are registered in the U.S. Patent and Trademark Office. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc., under license. All other product or service names are the property of their respective owners. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. (c) Motorola, Inc. 2002
MRFIC2408PP/D

▲Up To Search▲

Price & Availability of MRFIC2408

	To Download MRFIC2408 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .