 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Ordering number:ENN6479 PNP Epitaxial Planar Silicon Transistor CPH5505 DC/DC Converter Applications Applications * Relay drivers, lamp drivers, motor drivers, strobes. Package Dimensions unit:mm 2182 [CPH5505] 2.9 5 4 3 Features * Composite type with two PNP transistors contained in a single package facilitating high-density mounting. * The CPH5505 consists of two chips which are equivalent to the CPH3109 encapsulated in a package. * Ultrasmall package facilitates miniaturization in end products (mounting height : 0.9mm). 0.6 1 0.95 2 0.4 0.6 1.6 2.8 0.05 Specifications Absolute Maximum Ratings at Ta = 25C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Base Current Collector Dissipation Total Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP IB PC PT Tj Tstg Conditions 0.4 1 : Collector 2 : Collector 3 : Base 4 : Emitter Common 5 : Base SANYO : CPH5 0.2 0.7 0.9 Ratings -30 -30 -5 -3 -5 -600 0.2 0.15 Unit V V V A A mA W W C C Mounted on a ceramic board (600mm2x0.8mm) Mounted on a ceramic board (600mm2x0.8mm) 0.9 1.2 150 -55 to +150 Electrical Characteristics at Ta = 25C Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance Symbol ICBO IEBO hFE fT Cob VCB=-30V, IE=0 VEB=-4V, IC=0 VCE=-2V, IC=-500mA VCE=-10V, IC=-500mA VCB=-10V, f=1MHz 200 380 25 Conditions Ratings min typ max -0.1 -0.1 560 MHz pF Unit A A Marking CPH5505 : EE Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN D2000TS (KOTO) TA-2845 No.6479-1/4 CPH5505 Continued from preceding page. Ratings Parameter Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time Storage Time Turn-OFF Time Symbol VCE(sat)1 VCE(sat)2 VBE(sat) Conditions IC=-1.5A, IB=-30mA IC=-1.5A, IB=-75mA IC=-1.5A, IB=-30mA -30 -30 -5 50 270 25 min typ -155 -105 -0.83 max -230 -155 -1.2 Unit mV mV V V V V ns ns ns V(BR)CBO IC=-10A, IE=0 V(BR)CEO IC=-1mA, RBE= V(BR)EBO IC=-10A, IC=0 ton tstg tf See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. Electrical Connection B1 EC B2 Switching Time Test Circuit PW=20s D.C.1% INPUT RB 24 + 100F 5V + 470F -12V IB1 IB2 C1 C2 50 VR10 -20IB1=20IB2=IC=-500mA --2.0 IC -- VCE mA --40mA --4.0 IC -- VBE VCE=--2V --3 0 0 --2 mA --10mA --3.5 Collector Current, IC - A Collector Current, IC - A --1.6 --8mA --3.0 --2.5 --2.0 --1.5 --1.0 --0.5 --50m A --6mA --4mA --1.2 --0.8 --2mA --0.4 0 0 --200 --400 --600 --800 IB=0 --1000 IT01743 0 0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 IT01744 Collector-to-Emitter Voltage, VCE - V 1000 7 5 3 2 Base-to-Emitter Voltage, VBE - V --1.0 7 5 3 2 --0.1 7 5 3 2 --0.01 7 5 3 2 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 hFE -- IC VCE=--2V VCE(sat) -- IC IC / IB=20 Ta=75C 25C --25C Collector-to-Emitter Saturation Voltage, VCE (sat) - V DC Current Gain, hFE 100 7 5 3 2 7 Ta= C --25 5C 10 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 Collector Current, IC - A 5 7 --10 IT01745 --0.001 --0.01 Ta=7 5C 25C --25 C C 25 Collector Current, IC - A 5 7 --10 IT01746 No.6479-2/4 CPH5505 Collector-to-Emitter Saturation Voltage, VCE (sat) - V --10 7 5 3 2 --1.0 7 5 3 2 --0.1 7 5 3 2 --0.01 --0.01 2 3 5 7 --0.1 VCE(sat) -- IC IC / IB=50 Base-to-Emitter Saturation Voltage, VBE (sat) - V --10 7 5 3 2 VBE(sat) -- IC IC / IB=50 --1.0 7 5 3 2 Ta= --25C 75C 25C Ta C =75 --25 2 C 25 C 3 Collector Current, IC - A 5 7 --1.0 2 3 5 7 --10 IT01747 --0.1 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 Collector Current, IC - A 1000 5 7 --10 IT01748 2 Cob -- VCB f=1MHz Gain-Bandwidth Product, f T - MHz f T -- IC VCE= --10V 7 5 3 2 Output Capacitance, Cob - pF 100 7 5 100 7 5 3 2 3 2 10 --1.0 2 3 5 7 --10 2 3 5 IT01749 10 --10 2 3 5 Collector-to-Base Voltage, VCB - V --10 7 5 Collector Current, IC - mA 7 --100 2 3 5 7 --1000 2 3 IT01750 ASO ICP= --5A 10 Collector Dissipation, PC - W 1.4 PC -- Ta Collector Current, IC - A 3 2 IC= --3A 1.2 s 0 50 1m s 0 --1.0 7 5 3 2 10 1.0 0.9 0.8 s DC 10 op era tio ms 0m s To t al 1u 0.6 di n nit ss ip ati on --0.1 7 5 3 2 0.4 --0.01 --0.1 Ta=25C Single pulse 1unit Mounted on a ceramic board(600mm2x0.8mm) 2 3 5 7 --1.0 2 3 5 7 --10 2 3 5 0.2 0 IT01751 Mounted on a ceramic board(600mm2x0.8mm) 0 20 Collector-to-Emitter Voltage, VCE - V 1.0 Ambient Temperature, Ta - C 40 60 80 100 120 140 160 IT01820 PC(TR2) -- PC(TR1) Collector Dissipation, PC(TR2) - W 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 1unit Mounted on a ceramic board(600mm2x0.8mm) 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Collector Dissipation, PC(TR1) - W IT01821 No.6479-3/4 CPH5505 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of December, 2000. Specifications and information herein are subject to change without notice. PS No.6479-4/4 |
Price & Availability of CPH5505
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |