Part Number Hot Search : 
FFV36AK 20N36 RF2105 RAPH2SG 08100 FCX61903 6EJMS1 60040215
Product Description
Full Text Search
 

To Download MAX1747EVKIT Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 19-1871; Rev 0; 12/00
MAX1747 Evaluation Kit
General Description
The MAX1747 evaluation kit (EV kit) is a fully assembled and tested surface-mount circuit board that contains three charge-pump regulators. The first one is a highcurrent step-up DC-DC converter and is configured for a +5V output that provides up to 200mA of current. The other two charge pumps are low-current charge pumps that generate positive and negative voltages. A +3.0VDC to +3.6VDC source can be utilized to power the EV kit input. The low-current negative charge-pump circuit is configured for a -7V output; the low-current positive chargepump circuit is configured for a +12V output. Both circuits provide up to 20mA of current. The high-current step-up DC-DC converter or the EV kit's input source can be used to power either or both charge pumps. The MAX1747 EV kit demonstrates an inductorless and low profile (1.1mm max) solution. Operation up to 1.23MHz allows the use of tiny surface-mount components and provides fast transient response. o Three Charge-Pump Regulators +5V Output at 200mA +12V Output at 20mA -7V Output at 20mA o High-Current Output Regulated to 1% o Adjustable Outputs o Integrated Power MOSFETs o 1A Shutdown Current o Switching Frequency Up to 1.23MHz o Fast Transient Response o Surface-Mount Components o Fully Assembled and Tested
Features
o Low-Profile Solution, 1.1mm max Height
Evaluates: MAX1747
Ordering Information
PART MAX1747EVKIT TEMP.RANGE 0C to +70C IC PACKAGE 20 TSSOP
Component List
DESIGNATION C1, C2, C3, C17 QTY 4 DESCRIPTION 4.7F, 6.3V X7R ceramic capacitors (1210) Taiyo Yuden LMK325BJ475MD 1F, 16V X5R ceramic capacitors (1206) Murata GRM42-6X5R105K016 0.47F, 25V X7R ceramic capacitors (1206) Murata GRM42-6X7R474K025 0.1F, 16V X7R ceramic capacitors (0603) Taiyo Yuden EMK107BJ104KA 1500pF, 50V X7R ceramic capacitor (0603) Taiyo Yuden UMK107BJ152KZ 0.22F, 10V X7R ceramic capacitor (0603) Taiyo Yuden LMK107BJ224KA Not installed (1210) DESIGNATION D1-D4 R1 R2, R4, R6 R3 R5 R7 R8 R10 U1 JU1 JU2, JU3 None None None None QTY 4 1 3 1 1 0 1 1 1 1 2 3 1 1 1 DESCRIPTION 200mA, 25V Schottky diodes (SOT23) Fairchild BAT54S 150k 1% resistor (0805) 49.9k 1% resistors (0805) 432k 1% resistor (0805) 280k 1% resistor (0805) Not installed (0805) 107k 1% resistor (0805) 1M 5% resistor (0805) MAX1747EUP (20 TSSOP) 2-pin header 3-pin headers Shunts (JU1, JU2, JU3) MAX1747 PC board MAX1747 data sheet MAX1747 EV kit data sheet
C5, C7, C20, C21, C22
5
C6, C8, C14
3
C9, C11, C12, C15, C16, C19
6
C10
1
C13 C4, C18
1 0
________________________________________________________________ Maxim Integrated Products
1
For price, delivery, and to place orders, please contact Maxim Distribution at 1-888-629-4642, or visit Maxim's website at www.maxim-ic.com.
MAX1747 Evaluation Kit Evaluates: MAX1747
Component Suppliers
SUPPLIER Fairchild Murata Nihon Taiyo Yuden PHONE 408-822-2000 814-237-1431 661-867-2555 408-573-4150 FAX 408-822-2102 814-238-0490 661-867-2698 408-573-4159
The low-current negative charge pump provides -7V output; other negative output voltages can be evaluated by replacing two voltage feedback resistors. The output can be adjusted to -8V. The low-current positive charge pump provides a +12V output (VP); other output voltages can be evaluated by replacing two voltage feedback resistors. The output can be adjusted up to +13V. Jumper options allow either charge-pump circuit to be fed power from the EV kit's input (VIN) or the high-current step-up DC-DC converter output (VOUT). The MAX1747 switching frequency is determined by resistor R8 and the voltage supplied to the EV kit input pad (VIN). Applying a voltage in the range of +3.0V to +3.6V to the VIN pad causes the switching frequency to operate in the 980kHz to 1.23MHz range, respectively. An off-board CMOS or bipolar transistor can control the EV kit's shutdown feature.
Note: Please indicate that you are using the MAX1747 when contacting these component suppliers.
Quick Start
The MAX1747 EV kit is fully assembled and tested. Follow these steps to verify board operation. Do not turn on the power supply until all connections are completed.
Output
1) Connect a voltmeter to the VOUT pad. 2) Verify that shunts are present across pins 1 and 2 of jumpers JU2 (SUPN) and JU3 (SUPP). Verify that jumper JU1 (SHDN) does not have a shunt installed. 3) Connect a +3.0VDC to +3.6VDC power supply to the VIN pad. 4) Connect the supply ground to the GND pad. 5) Turn on the power supply and verify that the highcurrent step-up DC-DC converter output (VOUT) is +5V. 6) Verify that the low-current negative charge pump output (VN) is -7V. 7) Verify that the low-current positive charge pump output (VP) is +12V. For instructions on selecting the feedback resistors for other output voltages, see the Evaluating Other Output Voltages section. The input voltage range is +3.0V to +3.6V when selecting the output voltage.
Jumper Selection
Shutdown Mode The MAX1747 EV kit features a shutdown mode that reduces the EV kit's quiescent current to less than 60A (typ). The two-pin jumper, JU1, selects the shutdown modes for the MAX1747. Table 1 lists the selectable jumper options.
Table 1. Jumper JU1 Functions
SHUNT LOCATION None Installed SHDN PIN Connected to VIN via R8 Connected to GND OUTPUT MAX1747 enabled, operation up to 1.23MHz Shutdown mode, VOUT = 0
Detailed Description
The MAX1747 EV kit contains a high-current step-up DC-DC converter and two low-current charge-pump circuits. The EV kit's voltage input range is from +3.0V to +3.6V as configured, and can be extended to operate in the +2.7V to +5.5V range. The high-current stepup DC-DC converter output voltage can be adjusted from +VIN to +5.5V with resistors.
A CMOS open-drain or bipolar open-collector transistor can be connected to the EV kit SHDN pad and ground to control the shutdown mode. The shunt for jumper JU1 must be removed for this feature to function. Low-Current Negative Voltage Source The MAX1747 EV kit features an option to choose which voltage source feeds the low-current negative charge-pump circuit. Jumper JU2 selects the input voltage source for pin SUPN on the MAX1747. Table 2 lists the options.
2
_______________________________________________________________________________________
MAX1747 Evaluation Kit
Table 2. Jumper JU2 Functions
SHUNT LOCATION 1, 2 SUPN PIN Connected to VOUT Connected to VIN OPERATING MODE VOUT voltage source feeds low-current negative input Input voltage source, VIN feeds low-current negative input
Low-Current Positive Charge-Pump Output Voltages (VP)
The MAX1747 EV kit's low-current positive chargepump output is set to +12V by feedback resistors (R3, R4). To generate output voltages other than +12V, select different external voltage-divider resistors (R3, R4). Refer to Output Voltage Selection in the MAX1747 data sheet for instructions on selecting the resistors. Jumper JU4 is provided to improve the efficiency of the low-current positive charge pump for output voltages under 10V. See Table 3 for the jumper selection of output voltage ranges.
Evaluates: MAX1747
2, 3
Low-Current Positive Voltage Efficiency The MAX1747 EV kit features an option to improve the low-current positive charge pump efficiency for low output voltages at VP. Jumper JU3 selects the voltage source for the maximum pump voltage, and thus, maximum efficiency. Table 3 lists the options.
Table 3. Jumper JU3 Functions
SHUNT LOCATION 1, 2 2, 3 DIODE D1 Connected to VOUT Connected to VIN OPERATING MODE VP > 10V; VOUT feeds D1 VP < 10V; VIN feeds D1
Evaluating Other Output Voltages
High-Current Step-Up DC-DC Converter Output Voltages (VOUT)
The MAX1747 EV kit's high-current step-up DC-DC converter output is set to +5V by feedback resistors (R1, R2). To generate output voltages other than +5V, select different external voltage-divider resistors (R1, R2). Refer to Output Voltage Selection in the MAX1747 data sheet for instructions on selecting the resistors.
Low-Current Negative Charge-Pump Output Voltages (VN)
The MAX1747 EV kit's low-current negative chargepump output is set to -7V by feedback resistors (R5, R6). To generate output voltages other than -7V, select different external voltage-divider resistors (R5, R6). Refer to Output Voltage Selection in the MAX1747 data sheet for instructions on selecting the resistors. See Table 2 for the jumper selection of input voltage ranges.
_______________________________________________________________________________________
3
Evaluates: MAX1747
MAX1747 Evaluation Kit
Figure 1. MAX1747 EV Kit Schematic
4
C1 4.7F 6.3V C17 4.7F 6.3V R7 SHORT 18 6 IN OUT FB 3 RDY 15 C19 0.1F D1 1 L 3 R 1 2 JU3 VIN 12 DRVN DRVP C16 0.1F 3 14 3 C11 0.1F 1 2 VOUT VOUT JU2 D4 R 3 1L 2 R D3 3 C12 0.1F D2 1L 10 FBN R2 C5 1F R3 432k 1% GND C15 0.1F VIN 3 C20 1F 1 2 13 SUPN SUPP R2 49.9k 1% C22 1F C4 OPEN R1 150k 1% C3 4.7F 6.3V 4 C2 4.7F 6.3V GND SUPM 20 +5V VOUT R10 1M RDY C9 0.1F C21 1F C18 OPEN 2
+3.0V TO +3.6V
VIN
GND
C8 0.47F
U1 MAX1747
L
C6 0.47F +12V VP
-7V R5 280k 1% R6 49.9k 1% 8 REF CXP 11 SHDN JU1 SHDN 5 INTG C10 1500pF GND 7 PGND 16 TGND TGND C13 0.22F FBP 9 19 C14 0.47F CXN 17 1 2
VN
C7 1F
GND
R8 107k 1% VIN
_______________________________________________________________________________________
R4 49.9k 1%
MAX1747 Evaluation Kit Evaluates: MAX1747
1.0"
Figure 2. MAX1747 EV Kit Component Placement Guide-- Component Side
1.0"
Figure 3. MAX1747 EV Kit PC Board Layout--Component Side
1.0"
Figure 4. MAX1747 EV Kit PC Board Layout--Solder Side
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
5 _____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 (c) 2000 Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products.


▲Up To Search▲   

 
Price & Availability of MAX1747EVKIT

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X