|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Product Description Sirenza Microdevices' SHF-0189 is a high performance AlGaAs/ GaAs Heterostructure FET (HFET) housed in a low-cost surface-mount plastic package. The HFET technology improves breakdown voltage while minimizing Schottky leakage current resulting in higher PAE and improved linearity. Output power at 1dB compression for the SHF-0189 is +27 dBm when biased for Class AB operation at 8V,100mA. The +40 dBm third order intercept makes it ideal for high dynamic range, high intercept point requirements. It is well suited for use in both analog and digital wireless communication infrastructure and subscriber equipment including 3G, cellular, PCS, fixed wireless, and pager systems. Typical Gain Performance (8V,100mA) 35 30 25 20 15 10 5 0 -5 0 1 2 SHF-0189 0.05 - 6 GHz, 0.5 Watt GaAs HFET Product Features * High Linearity Performance at 1.96 GHz +27 dBm P1dB +40 dBm Output IP3 +16.5 dB Gain * High Drain Efficiency Gain, Gmax (dB) Gmax * See App Note AN-031 for circuit details Applications * Analog and Digital Wireless Systems * 3G, Cellular, PCS * Fixed Wireless, Pager Systems Test Frequency 0.90 GHz 1.96 GHz 0.90 GHz 1.96 GHz 0.90 GHz 1.96 GHz 0.90 GHz 1.96 GHz 0.90 GHz 1.96 GHz 1.96 GHz U nits Min Typ 23.3 20.1 18.4 14.7 18.6 16.7 40 40 27.2 27.5 3.2 294 198 -1.9 -17 -22 80 Max Gain 3 4 5 6 Frequency (GHz) 7 8 Symbol D evice C haracteristics (unless otherw ise noted) Test C onditions, 25C VDS=8V, IDQ=100mA ZS=ZS*, ZL=ZL* ZS=ZL= 50 Ohms Gmax S 21 Gai n OIP3 P 1dB NF IDSS gm VP BVGS BVGD Rth V DS IDQ PDISS Maxi mum Avai lable Gai n Inserti on Gai n Power Gai n [2] [1] dB dB dB m dB m dB m dB mA mS V V V o 16.6 20.2 Appli cati on C i rcui t [2] 204 144 -3.0 - 384 252 -1.0 -15 -17 8.0 160 0.8 Output Thi rd Order Intercept Poi nt Output 1dB C ompressi on Poi nt Noi se Fi gure Saturated D rai n C urrent Tranconductance Pi nch-Off Voltage [1] [2] Appli cati on C i rcui t Appli cati on C i rcui t Appli cati on C i rcui t VDS= VDSP, VGS= 0V VDS= VDSP, VGS= -0.25V VDS= 2.0V, IDS= 0.6mA Gate-Source Breakdown Voltage Gate-D rai n Breakdown Voltage Thermal Resi stance Operati ng Voltage Operati ng C urrent [3] [3] [3] [1] [1] IGS= 1.2mA, drai n open IGD= 1.2mA, VGS= -5.0V juncti on-to-lead drai n-source drai n-source, qui escent C /W V mA W Power D i ssi pati on [1] 100% tested - Insertion gain tested using a 50 ohm contact board (no matching circuitry) during final production test. [2] Sample tested - Samples pulled from each wafer/package lot. Sample test specifications are based on statistical data from sample test measurements. The test fixture is an engineering application circuit board. The application circuit was designed for the optimum combination of linearity, P1dB, and VSWR. [3] Maximum recommended power dissipation is specified to maintain TJ<150C at TL=85C. VDS * IDQ<0.8W is recommended for continuous reliable operation. The information provided herein is believed to be reliable at press time. Sirenza Microdevices assumes no responsibility for inaccuracies or omissions. Sirenza Microdevices assumes no responsibility for the use of this information, and all such information shall be entirely at the user's own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Sirenza Microdevices does not authorize or warrant any Sirenza Microdevices product for use in life-support devices and/or systems. Copyright 2003 Sirenza Microdevices, Inc. All worldwide rights reserved. 522 Almanor Ave., Sunnyvale, CA 94085 Phone: (800) SMI-MMIC http://www.sirenza.com EDS-101240 Rev D 1 SHF-0189 0.5 Watt HFET Absolute Maximum Ratings MTTF is inversely proportional to the device junction temperature. For junction temperature and MTTF considerations the bias condition should also satisfy the following expression: PDC < (TJ - TL) / RTH where: PDC = IDS * VDS (W) TJ = Junction Temperature (C) TL = Lead Temperature (pin 4) (C) RTH = Thermal Resistance (C/W) MTTF @ TJ=150C exceeds 1E7 hours Parameter Drain Current Forward Gate Current Reverse Gate Current Drain-to-Source Voltage Gate-to-Source Voltage RF Input Power Operating Lead Temperature Storage Temperature Range Power Dissipation Channel Temperature Symbol IDS IGSF IGSR VDS VGS PIN TL Tstor PDISS TJ Value 200 1.2 1.2 +9.0 <-5 or >0 200 See Graph -40 to +150 See Graph +165 Unit mA mA mA V V mW C C W C Operation of this device beyond any one of these limits may cause permanent damage. For reliable continuous operation, the device voltage and current must not exceed the maximum operating values specified in the table on page 1. Total Dissipated Power (W) Power Derating Curve 1.50 1.00 0.75 0.50 0.25 0.00 -40 -15 Operational (Tj<150C) ABS MAX (Tj<165C) 87654321 87654321 87654321 87654321 87654321 87654321 1.25 This area not recommended for continuous reliable operation. 10 35 60 85 Lead Temperature (C) 110 135 160 Typical Performance - Engineering Application Circuits (See App Note AN-031) Freq (MH z ) 900 1960 2140 2450 VDS (V) 8 8 8 8 IDQ (mA) 100 100 100 100 P 1d B (dB m) 27.2 27.6 27.5 27.3 OIP3* (dB m) 40 40 40 40 Gain (dB ) 18.6 16.7 15.2 15.2 S11 (dB ) -25 -20 -24 -16 S 22 (dB ) -13 -8 -14 -14 NF (dB ) 4.7 3.2 3.8 3.1 * POUT= +15dBm per tone, 1MHz tone spacing Data above represents typical performance of the application circuits noted in Application Note AN-031. Refer to the application note for additional RF data, PCB layouts, and BOMs for each application circuit. The application note also includes biasing instructions and other key issues to be considered. For the latest application notes please visit our site at www.sirenza.com or call your local sales representative. 522 Almanor Ave., Sunnyvale, CA 94085 Phone: (800) SMI-MMIC http://www.sirenza.com EDS-101240 Rev D 2 SHF-0189 0.5 Watt HFET De-embedded S-Parameters (ZS=ZL=50 Ohms, VDS=8V, IDS=100mA, 25 C) 35 Gain & Isolation -10 -15 -20 Gain, Gmax (dB) 30 25 20 15 10 5 0 -5 0 1 2 3 4 5 6 7 8 Gain Isolation Gmax Isolation (dB) -25 -30 -35 -40 -45 -50 Frequency (GHz) S11 vs Frequency 1.0 6 GHz 0.5 2.0 0.5 S22 vs Frequency 1.0 2.0 4 GHz 0.2 3 GHz 8 GHz 5.0 0.2 8 GHz 6 GHz 5.0 0.0 0.2 0.5 1.0 2.0 5.0 inf 0.0 0.2 4 GHz 0.5 3 GHz 2 GHz 1.0 2.0 5.0 inf S22 1 GHz 5.0 0.2 2 GHz 5.0 0.2 S11 0.5 1 GHz 1.0 2.0 0.5 2.0 1.0 Note: S-parameters are de-embedded to the device leads with Z S=Z L=50. The data represents typical performace of the device. De-embedded s-parameters can be downloaded from our website (www.sirenza.com). 0.35 0.3 0.25 DC-IV Curves IDS (A) 0.2 0.15 0.1 0.05 0 0 1 2 3 4 5 6 7 8 VGS = -2.0 to 0V, 0.2V steps T=25 C VDS (V) 522 Almanor Ave., Sunnyvale, CA 94085 Phone: (800) SMI-MMIC http://www.sirenza.com EDS-101240 Rev D 3 Caution: ESD sensitive Appropriate precautions in handling, packaging and testing devices must be observed. SHF-0189 0.5 Watt HFET Part Number Ordering Information Part Number SHF-0189 Reel Siz e 7" Devices/Reel 1000 Pin Description Pin # 1 2 3 4 Function Gate Source Drain Source RF Input Description Connection to ground. Use via holes to reduce lead inductance. Place vias as close to ground leads as possible. RF Output Same as Pin 2 Part Symbolization The part will be symbolized with the "H1" designator and a dot signifying pin 1 on the top surface of the package. Mounting and Thermal Considerations It is very important that adequate heat sinking be provided to minimize the device junction temperature. The following items should be implemented to maximize MTTF and RF performance. 1. Multiple solder-filled vias are required directly below the ground tab (pin 4). [CRITICAL] 2. Incorporate a large ground pad area with multiple plated-through vias around pin 4 of the device. [CRITICAL] 3. Use two point board seating to lower the thermal resistance between the PCB and mounting plate. Place machine screws as close to the ground tab (pin 4) as possible. [RECOMMENDED] 4. Use 2 ounce copper to improve the PCB's heat spreading capability. [RECOMMENDED] Package Dimensions .161 3 .177 .068 H1 .096 .016 .019 .118 4 1 2 .041 .059 .015 DIMENSIONS ARE IN INCHES Recommended Mounting Configuration for Optimum RF and Thermal Performance Ground Plane Plated Thru Holes (0.020" DIA) SHF-0x89 Machine Screws 522 Almanor Ave., Sunnyvale, CA 94085 Phone: (800) SMI-MMIC http://www.sirenza.com EDS-101240 Rev D 4 |
Price & Availability of SHF-0189 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |