 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Bulletin PD-2.441 rev. E 02/02 30BQ100 SCHOTTKY RECTIFIER 3 Amp SMC Major Ratings and Characteristics Characteristics IF(AV) Rectangular waveform VRRM IFSM @ t p= 5 s sine VF TJ @ 3.0 Apk, TJ = 125C range Description/Features The 30BQ100 surface-mount Schottky rectifier has been designed for applications requiring low forward drop and small foot prints on PC boards. Typical applications are in disk drives, switching power supplies, converters, free-wheeling diodes, battery charging, and reverse battery protection. Small foot print, surface mountable Very low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability 30BQ100 Units 3.0 100 2100 0.62 - 55 to 175 A V A V C Device Marking: IR3J 2.75 (.108) 3.15 (.124) 5.59 (.220) 6.22 (.245) CATHODE ANODE 6.60 (.260) 7.11 (.280) .152 (.006) .305 (.012) 2.00 (.079) 2.62 (.103) .102 (.004) 0.76 (.030) 1.52 (.060) 7.75 (.305) 8.13 (.320) .203 (.008) 1 2 1 POLARITY 2 PART NUMBER Outline SMC Dimensions in millimeters and (inches) For recommended footprint and soldering techniques refer to Application Note # AN-994 www.irf.com 1 30BQ100 Bulletin PD-2.441 rev. E 02/02 Voltage Ratings Part number VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) 30BQ100 100 Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current 30BQ 3.0 4.0 Units Conditions A 50% duty cycle @ TL = 148 C, rectangular wave form 50% duty cycle @ TL = 138 C, rectangular wave form A 5s Sine or 3s Rect. pulse 10ms Sine or 6ms Rect. pulse mJ A TJ = 25 C, IAS = 2.8A, L = 10mH Current decaying linearly to zero in 1 sec Frequency limited by TJ max. Va = 1.5 x Vr typical Following any rated load condition and with rated VRRM applied IFSM EAS IAR Max. Peak One Cycle Non-Repetitive Surge Current Non Repetitive Avalanche Energy Repetitive Avalanche Current 2100 100 5 0.3 Electrical Specifications Parameters VFM Max. Forward Voltage Drop (1) 30BQ 0.79 0.90 0.62 0.70 Units Conditions V V V V mA mA pF nH V/s @ 3A @ 6A @ 3A @ 6A TJ = 25 C TJ = 125 C VR = 5VDC (test signal range 100KHz to 1Mhz) 25C Measured lead to lead 5mm from package body (Rated VR) VR = rated VR TJ = 125 C TJ = 25 C IRM CT LS Max. Reverse Leakage Current (1) 0.5 5.0 Max. Junction Capacitance Typical Series Inductance 115 3.0 10000 dv/dt Max. Voltage Rate of Change (1) Pulse Width < 300s, Duty Cycle < 2% Thermal-Mechanical Specifications Parameters TJ Tstg Max. Storage Temperature Range (**) 46 C/W DC operation 30BQ - 55 to 175 12 Units C C C/W DC operation Conditions Max. Junction Temperature Range (*) - 55 to 175 RthJL Max. Thermal Resistance Junction to Lead RthJA Max. Thermal Resistance Junction to Ambient wt Approximate Weight Case Style Device Marking (*) dPtot 1 0.24(0.008) g (oz.) SMC IR3J Similar to DO-214AB < thermal runaway condition for a diode on its own heatsink dTj Rth( j-a) (**) Mounted 1 inch square PCB 2 www.irf.com 30BQ100 Bulletin PD-2.441 rev. E 02/02 10 Reverse Current - I R (mA) 10 1 0.1 0.01 0.001 0.0001 0 0 T = 175C J 150C 125C 100C 75C 50C 25C Instantaneous Forward Current - I F (A) 20 40 60 80 100 1 Reverse Voltage - VR (V) T J = 175C T J = 125C T = 25C Junction Capacitance - C T (p F) J Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage (Per Leg) 1000 T = 25C J 100 0.1 0 0.2 0.4 0.6 0.8 1 Forward Voltage Drop - VFM (V) 1.2 10 0 20 40 60 Reverse Voltage - VR (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage (Per Leg) Fig. 1 - Max. Forward Voltage Drop Characteristics (Per Leg) 100 (C/W) thJC 10 Thermal Impedance Z D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 PDM t1 t2 1 Notes: Single Pulse (Thermal Resistance) 1. Duty factor D = t1/ t2 . . 2. Peak Tj = Pdm x ZthJC + Tc 0.1 0.00001 0.0001 0.001 0.01 0.1 1 t1 , Rectangular Pulse Duration (Seconds) 10 100 Fig. 4 - Max. Thermal Impedance Z thJC Characteristics (Per Leg) www.irf.com 3 30BQ100 Bulletin PD-2.441 rev. E 02/02 180 Allowable Lead Temperature (C) Average Power Loss (Watts) 2.5 DC D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 160 2 1.5 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 RMS Limit 140 Square wave (D = 0.50) 80% Rated Vr applied see note (2) 1 0.5 0 DC 120 100 0 1 2 3 4 Average Forward Current - I F(AV) (A) 5 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 Average Forward Current - I F(AV) (A) Fig. 5 - Maximum Average Forward Dissipation Vs. Average Forward Current Fig. 4 - Maximum Average Forward Current Vs. Allowable Lead Temperature Non-Repetitive Surge Current - I FSM (A) 10000 1000 100 At Any Rated Load Condition And With Rated Vrrm Applied Following Surge 10 10 100 1000 10000 Square Wave Pulse Duration - Tp (Microsec) Fig. 6 - Maximum Peak Surge Forward Current Vs. Pulse Duration (2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 80% rated VR 4 www.irf.com 30BQ100 Bulletin PD-2.441 rev. E 02/02 Tape & Reel Information 330 (13) 16 (0.63) 8 (0.32) 16 (0.63) FEED DIRECTION Dimensions in millimeters and (inches) Marking & Identification Each device has 8 characters, configurated 4 digits on two rows, for identification. The first row designates the device as manufactured by International Rectifier as indicated by the letters "IR", and the Part Number ( indicates the current rating and voltage/process). The second row indicates the year and the week of manufacturing. Ordering Information 30BQ SERIES - TAPE AND REEL WHEN ORDERING, INDICATE THE PART NUMBER AND THE QUANTITY ( IN MULTIPLES OF 3000 PIECES). EXAMPLE: 30BQ100TR - 6000 PIECES 30BQ SERIES - BULK QUANTITIES FIRST ROW IR 3J Voltage/ Process Current Rating (3A) IR logo C E F H J = = = = = 15 V 30 V 40 V 60 V 100 V WHEN ORDERING, INDICATE THE PART NUMBER AND THE QUANTITY ( IN MULTIPLES OF 1000 PIECES). EXAMPLE: 30BQ100 - 2000 PIECES SECOND ROW YY WW (Date Code) Week Year www.irf.com 5 30BQ100 Bulletin PD-2.441 rev. E 02/02 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 02/02 6 www.irf.com |
Price & Availability of 30BQ100
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |