|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
MBR130T1, MBR130T3 Surface Mount Schottky Power Rectifier Plastic SOD-123 Package . . . using the Schottky Barrier principle with a large area metal-to-silicon power diode. Ideally suited for low voltage, high frequency rectification or as free wheeling and polarity protection diodes in surface mount applications where compact size and weight are critical to the system. This package also provides an easy to work with alternative to leadless 34 package style. These state-of-the-art devices have the following features: http://onsemi.com * * * * * * Guardring for Stress Protection Low Forward Voltage 125C Operating Junction Temperature Epoxy Meets UL94, VO at 1/8 Package Designed for Optimal Automated Board Assembly ESD Ratings: Machine Model, C; ESD Ratings: Human Body Model, 3 SCHOTTKY BARRIER RECTIFIER 1.0 AMPERES 30 VOLTS Mechanical Characteristics * Reel Options: MBR130T1 = 3,000 per 7 reel/8 mm tape * * * * * * Reel Options: MBR130T3 = 10,000 per 13 reel/8 mm tape Device Marking: S3 Polarity Designator: Cathode Band Weight: 11.7 mg (approximately) Case: Epoxy, Molded Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable Lead and Mounting Surface Temperature for Soldering Purposes: 260C Max. for 10 Seconds SOD-123 CASE 425 STYLE 1 DEVICE MARKING S3 S3 = Device Code MAXIMUM RATINGS Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Current (Rated VR) TL = 65C Non-Repetitive Peak Surge Current (Surge Applied at Rated Load Conditions, Halfwave, Single Phase, 60 Hz) Storage Temperature Range Operating Junction Temperature Voltage Rate of Change (Rated VR) Symbol VRRM VRWM VR IF(AV) 1.0 IFSM 5.5 A Value 30 Unit V ORDERING INFORMATION Device MBR130T1 Package SOD-123 SOD-123 Shipping 3000/Tape & Reel 10,000/Tape & Reel A MBR130T3 Tstg TJ dv/dt -65 to +125 -65 to +125 1000 C C V/ms (c) Semiconductor Components Industries, LLC, 2001 1 February, 2001 - Rev. 1 Publication Order Number: MBR130T1/D MBR130T1, MBR130T3 THERMAL CHARACTERISTICS Characteristic Thermal Resistance, Junction to Ambient (Note 1.) Thermal Resistance, Junction to Lead (Note 1.) Symbol RJA RJL Value 230 108 Unit C/W C/W ELECTRICAL CHARACTERISTICS Characteristic Maximum Instantaneous Forward Voltage (Note 2.) (IF = 0.1 A, TJ = 25C) (IF = 0.7 A, TJ = 25C) (IF = 1.0 A, TJ = 25C) Maximum Instantaneous Reverse Current (Note 2.) (Rated dc Voltage, TC = 25C) (VR = 5 V, TC = 25C) 1. FR-4 or FR-5 = 3.5 x 1.5 inches using a 1 inch Cu pad. 2. Pulse Test: Pulse Width = 300 s, Duty Cycle 2%. Symbol VF - - 0.47 IR 60 10 0.35 0.45 - mA Typ Max Unit V 10 IF, INSTANTANEOUS FORWARD CURRENT (AMPS) 10 IF, INSTANTANEOUS FORWARD CURRENT (AMPS) 1 TJ = 125C 1 TJ = 125C 75C 0.2 0.25 0.3 0.35 25C 0.4 0.45 0.5 0.55 0.6 0.65 75C 0.2 0.25 0.3 25C 0.4 0.45 0.5 0.55 0.6 0.65 0.1 0.1 0.35 VF, INSTANTANEOUS FORWARD VOLTAGE (VOLTS) VF, INSTANTANEOUS FORWARD VOLTAGE (VOLTS) Figure 1. Maximum Forward Voltage Figure 2. Typical Forward Voltage http://onsemi.com 2 MBR130T1, MBR130T3 0.01 IR, REVERSE CURRENT (AMPS) TJ = 125C C, CAPACITANCE (pF) 30 0.001 75C 0.0001 200 180 160 140 120 100 80 60 40 20 0 5 10 15 20 25 VR, REVERSE VOLTAGE (VOLTS) 0 0 5 10 15 20 25 30 VR, REVERSE VOLTAGE (VOLTS) 35 0.00001 25C 0.000001 0.0000001 Figure 3. Typical Reverse Current IF(AV), AVERAGE FORWARD CURRENT (AMPS) 1.8 1.6 dc 1.4 1.2 1 0.8 0.6 0.4 0.2 0 0 20 40 60 80 100 TL, LEAD TEMPERATURE (C) 120 SQUARE WAVE RATED VOLTAGE APPLIED 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 Figure 4. Typical Capacitance PF(AV), AVERAGE FORWARD POWER DISSIPATION (WATTS) SQUARE WAVE dc 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 5. Current Derating, Lead, RqJL = 1085C/W Figure 6. Forward Power Dissipation RECOMMENDED FOOTPRINT FOR SOD-123 0.91 0.036 2.36 0.093 4.19 0.165 SOD-123 http://onsemi.com 3 EEEE EEEE EEEE EEEE EEEE EEEE EEEE EEEE 1.22 0.048 mm inches MBR130T1, MBR130T3 PACKAGE DIMENSIONS SOD-123 CASE 425-04 ISSUE C A C H 1 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. DIM A B C D E H J K INCHES MIN MAX 0.055 0.071 0.100 0.112 0.037 0.053 0.020 0.028 0.004 --0.000 0.004 --0.006 0.140 0.152 MILLIMETERS MIN MAX 1.40 1.80 2.55 2.85 0.95 1.35 0.50 0.70 0.25 --0.00 0.10 --0.15 3.55 3.85 K ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION NORTH AMERICA Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: ONlit@hibbertco.com Fax Response Line: 303-675-2167 or 800-344-3810 Toll Free USA/Canada N. American Technical Support: 800-282-9855 Toll Free USA/Canada EUROPE: LDC for ON Semiconductor - European Support German Phone: (+1) 303-308-7140 (Mon-Fri 2:30pm to 7:00pm CET) Email: ONlit-german@hibbertco.com French Phone: (+1) 303-308-7141 (Mon-Fri 2:00pm to 7:00pm CET) Email: ONlit-french@hibbertco.com English Phone: (+1) 303-308-7142 (Mon-Fri 12:00pm to 5:00pm GMT) Email: ONlit@hibbertco.com EUROPEAN TOLL-FREE ACCESS*: 00-800-4422-3781 *Available from Germany, France, Italy, UK, Ireland CENTRAL/SOUTH AMERICA: Spanish Phone: 303-308-7143 (Mon-Fri 8:00am to 5:00pm MST) Email: ONlit-spanish@hibbertco.com Toll-Free from Mexico: Dial 01-800-288-2872 for Access - then Dial 866-297-9322 ASIA/PACIFIC: LDC for ON Semiconductor - Asia Support Phone: 303-675-2121 (Tue-Fri 9:00am to 1:00pm, Hong Kong Time) Toll Free from Hong Kong & Singapore: 001-800-4422-3781 Email: ONlit-asia@hibbertco.com JAPAN: ON Semiconductor, Japan Customer Focus Center 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan 141-0031 Phone: 81-3-5740-2700 Email: r14525@onsemi.com ON Semiconductor Website: http://onsemi.com For additional information, please contact your local Sales Representative. AAAA AAAA 2 B E J D STYLE 1: PIN 1. CATHODE 2. ANODE http://onsemi.com 4 MBR130T1/D |
Price & Availability of MBR130 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |