|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Ordering number:ENN6319 TR : PNP Epitaxial Planar Silicon Transistor SBD : Schottky Barrier Diode CPH5701 DC/DC Converter Applications Features * Composite type with a PNP transistor and a Schottky barrier diode contained in one package facilitating high-density mounting. * Each device incorporated in the CPH5701 is equivalent to the CPH3106 and to the SBS004, respectively. * Ultrasmall package facilitates miniaturization in end products. Package Dimensions unit:mm 2156 [CPH5701] 2.9 5 4 3 0.6 1 0.95 2 0.4 0.6 1.6 2.8 0.05 Specifications Absolute Maximum Ratings at Ta = 25C Parameter [TR] Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Base Current Collector Dissipation Junction Temperature Storage Temperature [SBD] Repetitive Peak Reverse Voltage Non-repetitive Peak Reverse Surge Voltage Average Output Current Surge Current Junction Temperature Storage Temperature VRRM VRSM IO IFSM Tj Tstg 50Hz sine wave, 1 cycle VCBO VCEO VEBO IC ICP IB PC Tj Tstg Symbol Conditions 0.4 1 : Cathode 2 : Collector 3 : Base 4 : Emitter 5 : Anode SANYO : CPH5 0.2 0.7 0.9 Ratings -15 -12 -5 -3 -5 -600 0.2 0.15 Unit V V V A A mA W C C V V A A C C Mounted on a ceramic board (600mm2x0.8mm) 0.9 150 -55 to +125 15 15 1 10 -55 to +125 -55 to +125 Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 70500TS (KOTO) TA-2783 No.6319-1/5 CPH5701 Electrical Characteristics at Ta = 25C Parameter [TR] Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time Storage Time Fall Time [SBD] Reverse Voltage Forward Voltage Reverse Current Interterminal Capacitance Reverse Recovery Time Thermal Resistance VR VF1 VF2 IR C trr Rthj-a IR=1mA IF=0.5A IF=1A VR=6V VR=10V, f=1MHz IF=IR=100mA, See specified Test Circuit. 42 15 110 15 0.30 0.35 0.35 0.40 500 V V V A pF ns ICBO IEBO hFE1 hFE2 fT Cob VCE(sat) VCB=-12V, IE=0 VEB=-4V, IC=0 VCE=-2V, IC=-0.5A VCE=-2V, IC=-3A VCE=-2V, IC=-0.5A VCB=-10V, f=1MHz IC=-1.5A, IB=-30mA IC=-1.5A, IB=-30mA -15 -12 -5 30 90 10 200 70 280 36 -110 -0.85 -165 -1.2 MHz pF mV V V V V ns ns ns -0.1 -0.1 560 A A Symbol Conditions Ratings min typ max Unit VBE(sat) V(BR)CBO IC=-10A, IE=0 V(BR)CEO IC=-1mA, RBE= V(BR)EBO ton tstg tf IE=-10A, IC=0 See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. Mounted on a ceramic board (600mm2x0.8mm) C/W Electrical Connection A E B C C (Top view) Switching Time Test Circuit [TR] PW=20s D.C.1% INPUT RB VR 50 + 220F + 470F -5V VBE=5V VCC=-5V -20IB1= 20IB2= IC=-1.5A IB2 IB1 OUTPUT [SBD] 100mA Duty10% 10mA 10s 50 100 10 100mA RL trr No.6319-2/5 CPH5701 --2.0 IC -- VCE --16 mA [TR] --200 IC -- VCE --0.8mA [TR] --0.7mA --1.8 --14 mA --12mA Collector Current, IC - mA --10mA --180 --160 --140 --120 --100 --80 --60 --40 --20 Collector Current, IC - A --1.6 --1.4 --1.2 --0.6mA --0.5mA --0.4mA --8mA --6mA --1.0 --0.8 --0.6 --0.4 --0.2 0 0 --0.1 --0.2 --0.3 --0.4 --0.5 --0.6 --0.7 --0.8 --4mA --2mA --0.3mA --0.2mA --0.1mA IB=0 0 --0.5 --1.0 --1.5 --2.0 --2.5 --3.0 --3.5 --4.0 --4.5 --5.0 IB=0 --0.9 --1.0 0 Collector-to-Emitter Voltage, VCE - V --3.0 IT01017 Collector-to-Emitter Voltage, VCE - V 1000 7 5 IT01018 IC -- VBE VCE= --2V [TR] hFE -- IC Ta=75C 25C --25C [TR] VCE= --2V --2.5 Collector Current, IC - A --2.0 DC Current Gain, hFE 3 2 --1.5 100 7 5 3 2 --1.0 --0.5 Ta=7 5C 25 C --25 C 0 0 --0.2 --0.4 --0.6 --0.8 --1.0 IT00856 Base-to-Emitter Voltage, VBE - V 5 3 2 10 --0.01 2 3 5 Collector Current, IC - A 7 --0.1 2 3 5 7 --1.0 2 3 5 IT00857 f T -- IC [TR] VCE= --2V 1000 7 5 Cob -- VCB [TR] f=1MHz Gain-Bandwidth Product, f T - MHz Output Capacitance, Cob - pF 3 2 100 7 5 3 2 10 7 5 3 2 100 7 5 3 2 10 5 7--0.01 2 3 Collector Current, IC - A 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 IT00858 1.0 --0.1 2 3 5 Collector-to-Base Voltage, VCB - V 7 --1.0 2 3 5 7 --10 2 3 IT00859 3 VCE(sat) -- IC [TR] Collector-to-Emitter Saturation Voltage, VCE (sat) - mV 3 2 --100 7 5 3 2 --10 7 5 3 2 --1.0 --0.01 VCE(sat) -- IC [TR] IC / IB= --50 Collector-to-Emitter Saturation Voltage, VCE (sat) - mV 2 --100 7 5 3 2 --10 7 5 3 2 --1.0 --0.01 IC / IB= --20 C 75 a= T C 5 --2 25C C 75 Ta= 5C --2 25C 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 2 3 5 Collector Current, IC - A IT00860 Collector Current, IC - A 7 --0.1 2 3 5 7 --1.0 2 3 5 IT00861 No.6319-3/5 CPH5701 --10 7 VBE(sat) -- IC [TR] IC / IB= --50 Collector Current, IC - A --10 7 5 3 ASO ICP= --5A IC= --3A 1m [TR] 50 10 s Base-to-Emitter Saturation Voltage, VBE (sat) - V 5 3 2 2 --1.0 7 5 3 2 --0.1 7 5 3 2 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 0 s 25C DC --1.0 7 5 3 2 Ta= --25C 75C op 10 0m s ms era tio n --0.1 --0.01 Ta=25C Single pulse Mounted on a ceramic board (600mm2x0.8mm) 2 3 5 7 --1.0 2 3 5 7 --10 2 IT00863 Collector Current, IC - A 1.0 0.9 IT00862 Collector-to-Emitter Voltage, VCE - V 10 7 5 3 2 1.0 7 5 3 2 PC -- Ta M ou nte do na [TR] IF -- VF [SBD] Collector Dissipation, PC - W 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 20 m m Ambient Temperature,Ta - C 40 60 80 100 120 140 160 0.01 0 0.1 25C 3 2 Ta= ) 125 C .8 0.2 50 0.3 ce ram ic bo ard (6 00 mm 2 x0 Forward Current, IF - A 0.1 7 5 C 75 0 10 C C 0.4 0.5 IT00865 IT00864 Forward Voltage, VF - V Average Forward Power Dissipation, PF(AV) -- W 0.8 0.7 0.6 0.5 0.4 0.3 Rectangular wave 0.2 Sine wave 0.1 100 7 5 3 2 IR -- VR Ta=125C 100C [SBD] PF(AV) -- IO Rectangular wave =60 Rectangular wave =120 Rectangular wave =180 Sine wave =180 [SBD] Reverse Current, IR - mA 10 7 5 3 2 1.0 7 5 3 2 0.1 7 5 3 2 0.01 0 75C 50C 25C 360 180 360 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 IT00867 5 10 15 IT00866 Reverse Voltage, VR - V Average Forward Current, IO -- A No.6319-4/5 CPH5701 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of July, 2000. Specifications and information herein are subject to change without notice. PS No.6319-5/5 |
Price & Availability of CPH5701 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |