View NL3225_93732.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Inductors
For General Applications SMD
FEATURES * The NL series are available in 5 form factors ranging from 2016 to 5650. * Utilizing a miniaturized winding structure, these products provide high Q characteristics. * Inductance tolerance is 5 percent. APPLICATIONS Personal computers, hard disk drives, and other electronic equipment. SPECIFICATIONS
Operating temperature range -20 to +85C Storage temperature range -40 to +85C [Unit of products]
NL Series NL3225 Type
FLUX AND CLEANING Rosin-based flux is recommended. Cleaning Conditions
Solvent Time Chlorine-based solvent (Do not use acid or alkali solvents.) 2min max.
PRODUCT IDENTIFICATION NL 201614 (1) (2) (1)Series name (2)Dimensions LxWxT
201614 252018 322522 453232 565050 2.1x1.6x1.4mm 2.5x2.0x1.8mm 3.2x2.5x2.2mm 4.5x3.2x3.2mm 5.6x5.0x5.0mm
T- 2 R 2 J (3) (4) (5)
RECOMMENDED SOLDERING CONDITIONS REFLOW SOLDERING
10s max. 230C 200C 150C 100C Preheating: 120s Time (s) Natural cooling 30s max.
(3)Packaging style
T Taping (reel)
(4)Inductance value
1R0 330 1H 33H
FLOW SOLDERING
10s max. 260C Natural cooling
(5)Inductance tolerance
J K 5% 10%
150C 100C Preheating: 120s Time (s)
PACKAGING STYLE AND QUANTITIES
Packaging style Taping Type NL201614T NL252018T NL322522T NL453232T NL565050T Quantity 2000 pieces/reel 2000 pieces/reel 2000 pieces/reel 500 pieces/reel 400 pieces/reel
IRON SOLDERING Perform soldering at 250C on 30W max. within 5 seconds. VAPOR-PHASING
10s max. 220C 215C 150C 100C Preheating: 120s Time (s) Natural cooling 30s max.
Specifications which provide more details for the proper and safe use of the described product are available upon request. All specifications are subject to change without notice.
Inductors
For General Applications SMD
NL Series NL3225 Type
SHAPES AND DIMENSIONS/RECOMMENDED PC BOARD PATTERN
470J 3.20.2 2.20.2 0.5 Terminal electrode (0.4) 2.50.2 2 1 1.90.1 Weight: 50mg 2 1 Inductor Pattern
Dimensions in mm
ELECTRICAL CHARACTERISTICS
Inductance (H) 0.01 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12
Inductance tolerance 10, 5% 10, 5% 10, 5% 10, 5% 10, 5% 10, 5% 10, 5% 10, 5% 10, 5% 10, 5% 10, 5% 10, 5% 10, 5% 10, 5% 10, 5% 10, 5% 10, 5% 10, 5% 10, 5% 10, 5% 10, 5% 10, 5% 10, 5% 10, 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5%
Q min. 15 17 19 21 23 23 25 25 26 26 27 27 28 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30
Test frequency L, Q (MHz) 100 100 100 100 100 100 100 100 100 100 100 100 100 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 2.52 2.52
Self-resonant frequency (MHz)min. 2500 2300 2100 1900 1700 1500 1400 1300 1200 1100 1000 900 700 500 450 400 350 320 300 250 220 180 160 140 120 100 85 80 75 70 60 55 50 45 40 35 30 20
DC resistance ()max. 0.13 0.14 0.16 0.18 0.2 0.22 0.24 0.27 0.3 0.33 0.36 0.4 0.44 0.22 0.25 0.28 0.32 0.36 0.4 0.45 0.5 0.55 0.6 0.65 0.7 0.75 0.85 0.9 1 1.1 1.2 1.3 1.5 1.6 1.8 2 2.1 2.5
Rated current (mA)max. 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 400 390 370 350 320 290 260 250 220 200 180 170 150 140
Part No. NL322522T-010X NL322522T-012X NL322522T-015X NL322522T-018X NL322522T-022X NL322522T-027X NL322522T-033X NL322522T-039X NL322522T-047X NL322522T-056X NL322522T-068X NL322522T-082X NL322522T-R10X NL322522T-R12X NL322522T-R15X NL322522T-R18X NL322522T-R22X NL322522T-R27X NL322522T-R33X NL322522T-R39X NL322522T-R47X NL322522T-R56X NL322522T-R68X NL322522T-R82X NL322522T-1R0J NL322522T-1R2J NL322522T-1R5J NL322522T-1R8J NL322522T-2R2J NL322522T-2R7J NL322522T-3R3J NL322522T-3R9J NL322522T-4R7J NL322522T-5R6J NL322522T-6R8J NL322522T-8R2J NL322522T-100J NL322522T-120J
X: Please specify the inductance tolerance, K(10%) or J(5%) * Inductance tolerance is only standard. * Test equipment L, Q: YHP4194A IMPEDANCE ANALYZER (16085A+16093B+TDK TF-1) [L SRF: HP8753C NETWORK ANALYZER Rdc: MATSUSHITA VP-2941A DIGITAL MILLIOHM METER
0.12H]
Specifications which provide more details for the proper and safe use of the described product are available upon request. All specifications are subject to change without notice.
Inductors
For General Applications SMD
ELECTRICAL CHARACTERISTICS
Inductance (H) 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 Inductance tolerance 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% Q min. 30 30 30 30 30 30 30 30 30 30 20 20 20 20 20 20 20 20 20 Test frequency L, Q (MHz) 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796
NL Series NL3225 Type
Self-resonant frequency (MHz)min. 20 20 20 20 17 16 15 13 12 11 10 10 8 7 7 6 5 5 4
DC resistance ()max. 2.8 3.3 3.7 5 5.6 6.4 7 8 9 10 10 11 15 17 21 28 34 42 40 0.12H]
Rated current (mA)max. 130 120 110 80 70 65 60 55 50 45 40 70 65 60 50 45 40 35 25
Part No. NL322522T-150J NL322522T-180J NL322522T-220J NL322522T-270J NL322522T-330J NL322522T-390J NL322522T-470J NL322522T-560J NL322522T-680J NL322522T-820J NL322522T-101J NL322522T-121J NL322522T-151J NL322522T-181J NL322522T-221J NL322522T-271J NL322522T-331J NL322522T-391J NL322522T-471J
* Inductance tolerance is only standard. * Test equipment L, Q: YHP4194A IMPEDANCE ANALYZER (16085A+16093B+TDK TF-1) [L SRF: HP8753C NETWORK ANALYZER Rdc: MATSUSHITA VP-2941A DIGITAL MILLIOHM METER
TYPICAL ELECTRICAL CHARACTERISTICS INDUCTANCE vs. FREQUENCY CHARACTERISTICS
INDUCTANCE CHANGE vs. DC SUPERPOSITION CHARACTERISTICS
1000 500 Universal bridge 1000 Test circuit
DC
1
Test equipment: RF IMPEDANCE ANALYZER 4191A, YHP
4194A IMPEDANCE/GAIN-PHASE 1000 ANALYZER 500 220H 100H
L=5H C=20000F A Specimen YHP model-4255A or equivalent
0.5
220H 100H 82H
100
Inductance (H)
100 Inductance (H) 50
Inductance (H)
50
0.1
0.1H 0.068H
47H 18H 12H 10 8.2H 5
0.05
0.047H 0.033H 0.022H 0.015H
10 5
10H
1 0.01 0.01H 0.5 0.2
1H 1 0.5 0.1 0.5 1 5 Frequency (MHz) 10 40
1.5H
0.05
0.5 1
5
10 50 100 Frequency (MHz)
500 1000
5
10
50 100 DC current (mA)
500
Specifications which provide more details for the proper and safe use of the described product are available upon request. All specifications are subject to change without notice.
Inductors
For General Applications SMD
TYPICAL ELECTRICAL CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS
1000 Test equipment: 500 RF IMPEDANCE ANALYZER 4191A, YHP 0.1H 0.047H 100 50 0.022H 0.01H
NL Series NL3225 Type
INDUCTANCE CHANGE vs. TEMPERATURE CHARACTERISTICS
L /L20C(%)
5
Impedance ()
8.2H 33H 100H 80 20 40 60 Temperature(C)
-40 -20 100H 3.3H 8.2H
0
10 5
-5 Test equipment: LCR model-4275A, YHP at 10kHz 1Vrms
0.5 1
5
10 50 100 Frequency (MHz)
500 1000
Q vs. FREQUENCY CHARACTERISTICS
1000 4194A IMPEDANCE/GAIN-PHASE 100k ANALYZER 220H 50k 100H Test equipment: 500 RF IMPEDANCE ANALYZER 4191A, YHP
100 Q 50 0.1H 0.047H 10 5 10H 1k 0.5 1 500 5 10 50 100 Frequency (MHz) 500 1000 10k 5k Impedance () 0.022H 0.01H
100 50
1H
100 80 60
Test equipment:Q meter model-4343B, YHP 33H 68H 100H 220H 10H
4.7H 2.2H
0.1
0.5
1 5 Frequency (MHz)
10
40
Q 40 20 0 0.05 0.1
0.5 1 5 Frequency (MHz)
10
511_NL3225 980330
Specifications which provide more details for the proper and safe use of the described product are available upon request. All specifications are subject to change without notice.

▲Up To Search▲

Price & Availability of NL3225

	To Download NL3225 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .