|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
DISCRETE SEMICONDUCTORS DATA SHEET M3D124 BFU540 NPN SiGe wideband transistor Product specification Supersedes data of 2002 Jan 28 2003 Jun 12 Philips Semiconductors Product specification NPN SiGe wideband transistor FEATURES * Very high power gain * Very low noise figure * High transition frequency * Emitter is thermal lead * Low feedback capacitance * 45 GHz SiGe process. APPLICATIONS * RF front end * Wideband applications, e.g. analog and digital cellular telephones, cordless telephones (PHS, DECT, etc.) * Radar detectors * Pagers * Satellite television tuners (SATV) * High frequency oscillators. Marking code: A4. 2 Top view 1 MSB842 BFU540 PINNING PIN 1 2 3 4 emitter base emitter collector DESCRIPTION handbook, halfpage 3 4 DESCRIPTION NPN SiGe wideband transistor for low voltage applications in a plastic, 4-pin dual-emitter SOT343R package. QUICK REFERENCE DATA SYMBOL VCBO VCEO IC Ptot hFE Gmax NF PARAMETER collector-base voltage collector current (DC) total power dissipation DC current gain maximum power gain noise figure Ts 98 C IC = 40 mA; VCE = 2 V; Tj = 25 C IC = 2 mA; VCE = 2 V; f = 2 GHz; S = opt CAUTION This product is supplied in anti-static packing to prevent damage caused by electrostatic discharge during transport and handling. For further information, refer to Philips specs.: SNW-EQ-608, SNW-FQ-302A and SNW-FQ-302B. open emitter collector-emitter voltage open base CONDITIONS MIN. - - - - 70 - TYP. - - 40 - 140 20 0.9 MAX. 9 2.3 50 115 210 - - dB dB UNIT V V mA mW Fig.1 Simplified outline SOT343R. IC = 40 mA; VCE = 2 V; f = 2 GHz; Tamb = 25 C - 2003 Jun 12 2 Philips Semiconductors Product specification NPN SiGe wideband transistor LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). SYMBOL VCBO VCEO VEBO IC Ptot Tstg Tj Note 1. Ts is the temperature at the soldering point of the emitter pins. THERMAL CHARACTERISTICS SYMBOL Rth j-s PARAMETER thermal resistance from junction to soldering point VALUE 450 PARAMETER collector-base voltage collector-emitter voltage emitter-base voltage collector current (DC) total power dissipation storage temperature operating junction temperature Ts 98 C; note 1; see Fig.2 open base open collector CONDITIONS open emitter - - - - - -65 - MIN. 9 2.3 2.5 50 115 +150 150 BFU540 MAX. V V V UNIT mA mW C C UNIT K/W handbook, halfpage 150 MLE151 Ptot (mW) 100 50 0 0 40 80 120 Ts (C) 160 Fig.2 Power derating curve. 2003 Jun 12 3 Philips Semiconductors Product specification NPN SiGe wideband transistor CHARACTERISTICS Tj = 25 C; unless otherwise specified. SYMBOL V(BR)CBO V(BR)CEO V(BR)EBO ICBO hFE Cc Cre Gmax NF PL1 ITO Notes 1. Gmax is the maximum power gain, if K > 1. If K < 1 then Gmax = MSG. 2. ZS and ZL are optimized for gain. PARAMETER collector-base breakdown voltage collector-emitter breakdown voltage emitter-base breakdown voltage collector-base leakage current DC current gain collector capacitance feedback capacitance maximum power gain; note 1 noise figure output power at 1 dB gain compression third order intercept point CONDITIONS IC = 2.5 A; IE = 0 IC = 1 mA; IB = 0 IE = 2.5 A; IC = 0 IE = 0; VCB = 4.5 V IC = 40 mA; VCE = 2 V IE = ie = 0; VCB = 2 V; f = 1 MHz IC = 0; VCB = 2 V; f = 1 MHz IC = 40 mA; VCE = 2 V; f = 2 GHz; Tamb = 25 C IC = 2 mA; VCE = 2 V; f = 2 GHz; S = opt IC = 20 mA; VCE = 2 V; f = 2 GHz; ZS = ZS opt; ZL = ZL opt; note 2 IC = 40 mA; VCE = 2 V; f = 2 GHz; ZS = ZS opt; ZL = ZL opt; note 2 MIN. 9 2.3 2.5 - 70 - - - - - - TYP. - - - - 140 520 105 20 0.9 11 21 BFU540 MAX. - - - 15 210 - - - - - - UNIT V V V nA fF fF dB dB dBm dBm 2003 Jun 12 4 Philips Semiconductors Product specification NPN SiGe wideband transistor BFU540 handbook, halfpage 250 MLE152 handbook, halfpage 50 MLE153 hFE 200 IC (mA) 40 (1) (2) (3) (4) 150 30 (5) (6) 100 20 (7) (8) 50 10 0 0 10 20 30 40 50 IC (mA) (1) (2) (3) (4) 0 0 IB = 400 A. IB = 350 A. IB = 300 A. IB = 250 A. 1 IB = 200 A. IB = 150 A. IB = 100 A. IB = 50 A. 2 VCE (V) 3 VCE = 2 V; Tj = 25 C. (5) (6) (7) (8) Fig.3 DC current gain as a function of collector current; typical values. Fig.4 Output characteristics; typical values. handbook, halfpage 50 MLE154 fT (GHz) 40 handbook, halfpage 40 MLE155 gain (dB) 30 MSG 30 20 20 10 10 s21 Gmax 0 1 10 IC (mA) 102 0 102 103 f (MHz) 104 VCB = 1 V; f = 2 GHz; Tamb = 25 C. IC = 40 mA; VCE = 2 V; Tamb = 25 C. Fig.5 Transition frequency as a function of collector current; typical values. Fig.6 Gain as a function of frequency; typical values. 2003 Jun 12 5 Philips Semiconductors Product specification NPN SiGe wideband transistor BFU540 handbook, halfpage 200 Cre (fF) MLE156 handbook, halfpage 25 MLE157 ITO (dBm) 20 160 120 15 80 10 40 5 0 0 0.5 1 1.5 VCB (V) 2 0 1 10 IC (mA) 102 IC = 0; f = 1 MHz; Tamb = 25 C. VCE = 2 V; f = 2 GHz. Fig.7 Feedback capacitance as a function of collector-base voltage; typical values. Fig.8 Third order intercept point as a function of collector current. handbook, halfpage 12 MLE158 PL 1dB (dBm) 8 4 0 -4 1 10 IC (mA) 102 VCE = 2 V; f = 2 GHz; source and load tuned for optimum gain. Fig.9 Output power at 1 dB gain compression as a function of collector current. 2003 Jun 12 6 Philips Semiconductors Product specification NPN SiGe wideband transistor BFU540 handbook, full pagewidth 90 +1 10 GHz 135 +0.5 5 GHz +0.2 2.5 GHz 180 0 0.2 0.5 2 5 0 1 GHz -0.2 2.5 GHz 40 mA 4 mA -5 0 5 GHz +5 +2 45 1.0 0.8 0.6 0.4 0.2 1 GHz -0.5 -135 -1 MLE159 -2 -45 1.0 -90 IC = 4 mA and 40 mA; VCE = 2 V; Zo = 50 . Fig.10 Common emitter input reflection coefficient (s11). handbook, full pagewidth 90 135 40 mA 1 GHz 45 1 GHz 4 mA 5 0 10 GHz 25 180 20 15 10 -135 -45 -90 IC = 4 mA and 40 mA; VCE = 2 V; Zo = 50 . MLE160 Fig.11 Common emitter forward transmission coefficient (s21). 2003 Jun 12 7 Philips Semiconductors Product specification NPN SiGe wideband transistor BFU540 handbook, full pagewidth 90 135 45 1 GHz 0.25 180 0.2 0.15 0.1 0.05 4 mA 40 mA 0 10 GHz -135 -45 -90 IC = 4 mA and 40 mA; VCE = 2 V; Zo = 50 . MLE161 Fig.12 Common emitter reverse transmission coefficient (s12). handbook, full pagewidth 90 +1 135 +0.5 10 GHz +2 45 1.0 0.8 0.6 0.4 0.2 2 5 0 40 MHz 0 +0.2 5 GHz 0.5 +5 180 0 0.2 -0.2 2.5 GHz 1 GHz 40 mA -5 4 mA -0.5 -135 -1 1 GHz -2 -45 MLE162 1.0 -90 IC = 4 mA and 40 mA; VCE = 2 V; Zo = 50 . Fig.13 Common emitter output reflection coefficient (s22). 2003 Jun 12 8 Philips Semiconductors Product specification NPN SiGe wideband transistor BFU540 handbook, halfpage 4 MLE163 handbook, halfpage 3 MLE164 NFmin (dB) 3 NFmin (dB) 2 2 f = 5 GHz f = 2 GHz 1 1 0 0 4 8 12 16 20 IC (mA) 0 0 2 4 f (GHz) 6 VCE = 2 V; Tamb = 25 C. IC = 2 mA; VCE = 2 V; Tamb = 25 C. Fig.14 Minimum noise figure as a function of collector current. Fig.15 Minimum noise figure as a function of frequency. Noise data: VCE = 2 V; IC = 4 mA; Tamb = 25 C; typical values f (GHz) 2 3 4 5 6 7 8 9 10 11 12 Fmin (dB) 1.0 1.2 1.4 1.6 1.7 1.9 2.1 2.3 2.6 2.8 3.0 opt (mag) 0.39 0.23 0.11 0.14 0.28 0.41 0.47 0.54 0.62 0.63 0.61 (deg) 55.9 86.8 142.5 -121.0 -74.2 -52.1 -32.6 -14.1 3.7 22.7 36.8 rn () 0.20 0.15 0.13 0.16 0.27 0.43 0.66 0.91 1.22 1.44 1.65 2003 Jun 12 9 Philips Semiconductors Product specification NPN SiGe wideband transistor SPICE parameters for the BFU540 die SEQUENCE No. PARAMETER 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 (1) 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 Note 1. Not used. IS BF NF VAF IKF ISE NE BR NR VAR IKR ISC NC RB IRB RBM RE RC XTB EG XTI CJE VJE MJE TF XTF VTF ITF PTF CJC VJC MJC XCJC TR CJS VJS MJS FC VALUE 1.5 271.5 1.061 25 68 1060 2.9 50 1.01 1 6.4 1.2 1.21 8.75 - 5 0.9 9.25 -2.2 1.014 3 222 918 0.27 2.1 10 1.5 0.92 30 147 587 0.246 0.44 20 51 441 0.313 0.7 UNIT aA - - V mA fA - - - MV mA fA - - m - eV - fF mV - ps - V A deg fF mV - - ps fF mV - - handbook, halfpage B BFU540 Lb B' C' Lc C Cbe Cbe2 E' Ccs Cce Le Rcs MLE150 E Fig.16 Package equivalent circuit SOT343R2. List of components (see Fig.16) DESIGNATION Lb Lc Le Cbe1 Cbe2 Cce Ccs Rcs VALUE 1.18 1.04 0.32 146 55 56 100 170 nH nH nH fF fF fF fF UNIT 2003 Jun 12 10 Philips Semiconductors Product specification NPN SiGe wideband transistor PACKAGE OUTLINE Plastic surface mounted package; reverse pinning; 4 leads BFU540 SOT343R D B E A X y HE e vMA 3 4 Q A A1 c 2 wM B bp e1 b1 1 Lp detail X 0 1 scale 2 mm DIMENSIONS (mm are the original dimensions) UNIT mm A 1.1 0.8 A1 max 0.1 bp 0.4 0.3 b1 0.7 0.5 c 0.25 0.10 D 2.2 1.8 E 1.35 1.15 e 1.3 e1 1.15 HE 2.2 2.0 Lp 0.45 0.15 Q 0.23 0.13 v 0.2 w 0.2 y 0.1 OUTLINE VERSION SOT343R REFERENCES IEC JEDEC EIAJ EUROPEAN PROJECTION ISSUE DATE 97-05-21 2003 Jun 12 11 Philips Semiconductors Product specification NPN SiGe wideband transistor DATA SHEET STATUS LEVEL I DATA SHEET STATUS(1) Objective data PRODUCT STATUS(2)(3) Development DEFINITION BFU540 This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). II Preliminary data Qualification III Product data Production Notes 1. Please consult the most recently issued data sheet before initiating or completing a design. 2. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. 3. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. DEFINITIONS Short-form specification The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. DISCLAIMERS Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes Philips Semiconductors reserves the right to make changes in the products including circuits, standard cells, and/or software described or contained herein in order to improve design and/or performance. When the product is in full production (status `Production'), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. 2003 Jun 12 12 Philips Semiconductors Product specification NPN SiGe wideband transistor NOTES BFU540 2003 Jun 12 13 Philips Semiconductors Product specification NPN SiGe wideband transistor NOTES BFU540 2003 Jun 12 14 Philips Semiconductors Product specification NPN SiGe wideband transistor NOTES BFU540 2003 Jun 12 15 Philips Semiconductors - a worldwide company Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 For sales offices addresses send e-mail to: sales.addresses@www.semiconductors.philips.com. (c) Koninklijke Philips Electronics N.V. 2003 SCA75 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Printed in The Netherlands 613516/04/pp16 Date of release: 2003 Jun 12 Document order number: 9397 750 11468 |
Price & Availability of BFU540 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |