| PART |
Description |
Maker |
| 13915 |
Item 13915, Size No. 1 Phillips Screwdriver
|
List of Unclassifed Manufacturers
|
| 149-6330 149-6331 D00634 |
VDE Snipe Nose Pliers
|
List of Unclassifed Manufacturers
|
| PBW-1206-33 PBW-1201-33 PBW-1202-33 PBW-1203-33 |
KPTC2E10-6S 设备设计符合EMI规范，如VCCI，CISPR，催化裂化，德国VDE
Equipment Designed to Conform EMI Regulations Such As VCCI/CISPR/FCC/VDE/etc
KPTC 10C 10#20 PIN RECP
KPTC 6C 6#20 SKT RECP
KPTC 6C 6#20 PIN RECP
Equipment Designed to Conform EMI Regulations Such As VCCI,CISPR,FCC,VDE,etc
|
Bivar, Inc.
LAMBDA[DENSEI-LAMBDA]
|
| 54127899 98F003PT-R7 35F2542PT-H7 35F2547PT-K8 35F |
Dual/Triple Ultra-Low-Voltage SOT23 µP Supervisory Circuits
TIP PT SLOPED ROUND 3.2MM
TIP PT CONICAL 0.8MM
Microprocessor Supervisory Reset Circuits with Edge-Triggered, One-Shot Manual Reset
TIP PT-AA7 SLOPED ROUND 1.6MM
TIP PT SLOPED ROUND 1.2MM
TIP PT SCREWDRIVER 1.2MM 提示葡萄牙螺丝刀1.2毫米
TIP PT SCREWDRIVER 0.8MM 提示葡萄牙螺丝刀0.8毫米
TIP PT SCREWDRIVER 1.6MM 提示葡萄牙螺丝刀1.6mm
Dual/Triple Ultra-Low-Voltage SOT23 µP Supervisory Circuits 提示葡萄牙螺丝刀0.8毫米
Dual/Triple Ultra-Low-Voltage SOT23 µP Supervisory Circuits 提示葡萄牙倾斜.6mm
|
Opto 22
NXP Semiconductors N.V.
ITT, Corp.
|
| MAF1206 MAF-1220-33 MAF-1206-33 MAF-1210-33 MAF-12 |
Equipment Designed to Conform EMI Regulations Such As VCCI /CISPR /FCC /VDE /etc
Equipment Designed to Conform EMI Regulations Such As VCCI,CISPR,FCC,VDE,etc
|
LAMBDA[DENSEI-LAMBDA]
|
| MAS1206-33 MAS1220-33 |
Equipment Designed to Conform EMI Regulations Such As VCCI /CISPR /FCC /VDE /etc
Equipment Designed to Conform EMI Regulations Such As VCCI,CISPR,FCC,VDE,etc
Equipment Designed to Conform EMI Regulations Such As VCCI,CISPR,FCC,VDE,etc
|
DENSEI-LAMBDA
http://
|
| UNIFOX-P-VDE |
Needle-nose pliers with blade, notched grip area, VDE 1000 V AC/1500 V DC tested
|
PHOENIX CONTACT
|
| 70011 |
M3.5 x 12 taptite screws (Screws accept POZDRIV No. 2 screwdriver)
|
List of Unclassifed Manufacturers
|
| SF-THEX-4-150 |
T-handle screwdriver, for Allen screws, hexagon (with chamfer), size: Hex 4 x 150 mm, ergonomically shaped handle, matt chrome-plated
|
PHOENIX CONTACT
|
| SF-THEX-3-100 |
T-handle screwdriver, for Allen screws, hexagon (with chamfer), size: Hex 3 x 100 mm, ergonomically shaped handle, matt chrome-plated
|
PHOENIX CONTACT
|
| CNW4504 |
VDE 0884 Approved Ultra high CMR, High Speed Optocoupler
|
HP[Agilent(Hewlett-Packard)]
|
