| PART |
Description |
Maker |
| E-1071-627-DC24V-3.1A E-1071-623-DC24V-3.1A |
Designed for inductive loads (DC 24 V)
|
ETAL Group
|
| AN4402 |
Multichannel drivers driving inductive loads
|
STMicroelectronics
|
| BTS409L1 BTS409L1-13 |
Fast demagnetization of inductive loads
Fast demagnetization of inductive loads
|
Infineon Technologies A...
|
| E-L9823 |
Octal low-side driver for bulb, resistive and inductive loads with serial input control, output protection and diagnostic
|
STMicroelectronics
|
| EDS-220-Z-LA-I EDS-260-Z-LA-I EDS-370-Z-LA-I EDS-2 |
POSITION, LINEAR SENSOR-INDUCTIVE, 220mm, 4-20mA, CYLINDRICAL
POSITION, LINEAR SENSOR-INDUCTIVE, 260mm, 4-20mA, CYLINDRICAL
POSITION, LINEAR SENSOR-INDUCTIVE, 370mm, 4-20mA, CYLINDRICAL
POSITION, LINEAR SENSOR-INDUCTIVE, 250mm, 4-20mA, CYLINDRICAL
POSITION, LINEAR SENSOR-INDUCTIVE, 300mm, 4-20mA, CYLINDRICAL
POSITION, LINEAR SENSOR-INDUCTIVE, 100mm, 4-20mA, CYLINDRICAL
|
Micro-Epsilon Group
|
| REC-10LA |
Precision Linear Transducers, Designed for Mount in Hydraulic or Pneumatic Cylinder, Conductive Plastic Element, Designed for High Pressure Chamber of Small Cylinders, Equipped with Glass-Sealed Electrical Outputs
|
Vishay
|
| DS11-1002 DS11-1000 DS11-1003 DS11-1Y DS11-1001 |
DC solid state relay for loads up to 2A @ 60Vdc
|
Tyco Electronics
|
| P0502NL P0527NL P0429NL P0422NL P0420NL P0421NL P0 |
Designed for DC/DC converters, Wide variety of inductor sizes and current ratings available
Solutions based on impedance, size and current, Designed for DC/DC converters, Dielectric strength: 1000VRMS
|
Pulse A Technitrol Company
|
| DTL23A |
Voltage-Controlled, 2 Amp 100 Watt, Electronic Loads
|
Murata Manufacturing Co., Ltd.
|
| DTL23A |
Voltage-Controlled 2 Amp 100 Watt Electronic Loads
Voltage-Controlled, 2 Amp 100 Watt, Electronic Loads
Voltage-Controlled / 2 Amp 100 Watt / Electronic Loads
|
Datel
List of Unclassifed Manufacturers
ETC[ETC]
|
| DTL22A |
Voltage-Controlled 20 Amp 100 Watt, Electronic Loads
|
Murata Manufacturing Co., Ltd.
|
