| PART |
Description |
Maker |
| MAC16NG |
Printheads for Mobile Printers; Resolutions (dpi): 203; Print width (mm): 104; Resistance tolerance (O): 176; Platen diameter (max.)(f): 14; Print speed (mm/s): 25 to 100; Logic voltage (V): 2.7 to 5.25; Supply voltage (V): 3.13 to 8.5;
|
ON Semiconductor
|
| CR22E-120D-2.54DS CR22-100D-2.54DS CR22-100D-2.54D |
CONNECTOR ACCESSORY 连接器附
2.54mm Pitch Card Edge Connector 2.54mm间距卡边缘连接器
Serial Interface Board with Flash Memory
Mechanism, 2-inch wide, 3-inch/sec Print Speed, Rear Feed
Mechanism, 2-inch wide, 3-inch/sec Print Speed, w/Mini-Cutter, Front Feed
Mechanism, 2-inch wide, 3-inch/sec Print Speed, Front Feed
|
HIROSE ELECTRIC Co., Ltd.
Hirose Electric USA, INC.
HIROSE[Hirose Electric]
|
| 28C0236-0JW-10 |
this print is the property of laird tech
|
Laird Tech Smart Techno...
|
| 28C0236-0BS-10 |
this print is the property of laird tech
|
Laird Tech Smart Techno...
|
| LFB127079-000 |
this print is the property of laird tech
|
Laird Tech Smart Techno...
|
| LFB095051-000 |
this print is the property of laird tech
|
Laird Tech Smart Techno...
|
| HI2220P271R-10 |
this print is the property of laird tech
|
Laird Tech Smart Techno...
|
| MGV0503R68M-10 |
this print is the property of laird tech
|
Laird Tech Smart Techno...
|
| 29F0303-0T0-10 |
this print is the property of laird tech
|
Laird Tech Smart Techno...
|
| 29F0528-0T0-10 |
this print is the property of laird tech
|
Laird Tech Smart Techno...
|
| ST16C454 |
Quad UART with a Dual Foot Print Interface
|
Exar
|
