| PART |
Description |
Maker |
| X25057 X25057M X25057M-1.8 X25057M-2.7 X25057MI X2 |
5MHz Low Power SPI Serial E 2 PROM with IDLock?/a> Memory
5MHz Low Power SPI Serial E 2 PROM with IDLock⑩ Memory
5MHz Low Power SPI Serial E 2 PROM with IDLock Memory
XTAL MTL T/H HC49/U
Pulse Width Modulation (PWM) Controller IC; Topology:Buck (Step Down); Number of PWM Outputs:4; Input Voltage Primary Min:1.8V; Input Voltage Primary
5MHz Low Power SPI Serial E 2 PROM with IDLockMemory
XTAL CER SMT 7X5 4PAD 5MHz的低功耗SPI串行e2 IDLock⑩记忆胎膜早
|
XICOR[Xicor Inc.]
HIROSE ELECTRIC Co., Ltd.
|
| BTS6460SF |
SPI Power Controller
|
Infineon Technologies AG
|
| AX88796C |
Low-Power SPI or Non-PCI Ethernet Controller
|
ASIX Electronics Corporation
|
| BTS5572E SPOC-BTS5572E |
SPI Power Controller
24 A PWM BASED PRPHL DRVR, PDSO36 GREEN, PLASTIC PACKAGE-36
|
Infineon Technologies AG
|
| AT89C51CC03 |
8-bit microcontroller with CAN controller and 64-Kbyte Flash. 2-Kbyte RAM, 2-Kbyte EEPROM, SPI. Power Fail Detect (no need for external brown- out). Pinout compatible with T89C51CC01.
|
Atmel
|
| ST72T311N2B3S ST72E311 ST72E311N4D0S |
8-BIT MCU WITH 8 TO 16K OTP/EPROM, 384 TO 512 BYTES RAM, ADC, WDG, SCI, SPI AND 2 TIMERS
Bits number of 8 Memory type EPROM Microprocessor/controller features POR/Direct LED/Triac drive/AD Converters/PWM/Watchdog/LVD/SPI/SCI Frequency clock 16 MHz Memor
|
ST Microelectronics
SGS Thomson Microelectronics
|
| MCP2515-I/ML RXF3EID0 RXF3EID8 RXF3SIDH RXF3SIDL R |
Stand-Alone CAN Controller with SPI Interface
|
Microchip Technology
|
| EVAL6482H |
cSPIN: fully integrated microstepping motor controller with motion engine and SPI evaluation board
High power microstepping motor driver with the L6482H
|
ST Microelectronics
STMicroelectronics
|
| ENC424J600 ENC624J600 |
Stand-Alone 10/100 Ethernet Controller with SPI or Parallel Interface
|
Microchip Technology
|
| MCP2510T-E/SO MCP2510-I/ST MCP2510T-I/SO MCP2510T- |
The MCP2510 18-pin stand-alone CAN (Control Area Network) controller features an industry standard SPI serial interface, enabling ...
The MCP2510 18-pin stand-alone CAN (Control Area Network) controller features an industry standard SPI serial interface, enabling an easy connection to virtually any microcontroller. The MCP2510 provides immediate CAN support across the en
|
Microchip
|
