| PART |
Description |
Maker |
| AS3990 |
UHF RFID single chip reader EPC Class1 Gen2 compatible
|
austriamicrosystems AG
|
| WJR7090 |
Multi Protocol RFID Reader Module
|
WJ Communications
|
| MPR5000_06 MPR5000 |
Multi-Protocol RFID Reader Module EPC Class 0/0 Class1 and Gen2 with Integral Antenna
|
WJCI[WJ Communication. Inc.]
|
| MPR7040 |
Multi-Protocol RFID Reader Module Gen1, ISO 18000-6C (Gen2) in PCMCIA Type II Package
|
WJCI[WJ Communication. Inc.]
|
| MPR5000 |
Multi-Protocol RFID Reader Module EPC Class 0/0 Class1 and Gen2 with Integral Antenna 多协议RFID读写模块的EPC Class 0 / 0级和天线与积分第二代
|
Electronic Theatre Controls, Inc.
|
| AT88RF020NBSP AT88RF020 AT88RF020-WC-82 AT88RF020- |
13.56 MHz, 2048-bit RFID EEPROM SPECIALTY CONSUMER CIRCUIT, UUC9
13.56 MHz/ 2048-bit RFID EEPROM
Transponder IC with 2-Kbit memory, ISO14443-2/-3 type B compliant
From old datasheet system
|
Atmel, Corp.
Atmel Corp.
ATMEL[ATMEL Corporation]
|
| MCRF250 MCRF250-I_WFQ23 MCRF250-I_P MCRF250-I_S MC |
The MCRF250 is one time contactlessly programmable passive Radio Frequency Identification (RFID) IC device with advanced anti-collision features. The device is powered by an external RF transmitter (reader) through inductive coupling. The
125 kHz microID Passive RFID Device with Anti-Collision
From old datasheet system
|
MICROCHIP[Microchip Technology]
|
| U123P U3089M U3079M U427BFP U3082M U2097B U3084M |
TRANSIL
3 stages RF power amplifier demonstration board using: PD57002-E, PD57018-E, 2 x PD57060-E
RF power amplifier using 1 x PD55035S N-channel enhancement-mode lateral MOSFETs
Interface IC
Evaluation board using PD84002 for UHF RFID reader 接口IC
Trisil" for telecom equipment protection 接口IC
Evaluation board using PD84006L-E for 900 MHz 2-way radio
|
Jameco Electronics
SIEMENS AG
|
| BIM-418-10 SILRX-433-10 SILRX-433-5 SILRX-418-10 S |
UHF Radio Telemetry Receiver Module
|
Radiometrix Ltd
|
| MAPM-030400-060C00 |
Broadband UHF/VHF Power Module
|
M/A-COM Technology Solutions, Inc.
|
