| PART |
Description |
Maker |
| LTC7541AKNPBF |
Improved Industry Standard CMOS 12-Bit Multiplying DAC
|
Linear Technology
|
| LTC8143ENPBF LTC8143ESWTRPBF LTC7543GKSWPBF LTC754 |
Improved Industry Standard Serial 12-Bit Multiplying DACs; Package: PDIP; No of Pins: 16; Temperature Range: -40°C to 85°C SERIAL INPUT LOADING, 0.25 us SETTLING TIME, 12-BIT DAC, PDIP16
Improved Industry Standard Serial 12-Bit Multiplying DACs; Package: SO; No of Pins: 16; Temperature Range: -40°C to 125°C SERIAL INPUT LOADING, 0.25 us SETTLING TIME, 12-BIT DAC, PDSO16
Improved Industry Standard Serial 12-Bit Multiplying DACs; Package: SO; No of Pins: 16; Temperature Range: 0°C to 70°C SERIAL INPUT LOADING, 0.25 us SETTLING TIME, 12-BIT DAC, PDSO16
Improved Industry Standard Serial 12-Bit Multiplying DACs; Package: PDIP; No of Pins: 16; Temperature Range: 0°C to 70°C SERIAL INPUT LOADING, 0.25 us SETTLING TIME, 12-BIT DAC, PDIP16
Improved Industry Standard Serial 12-Bit Multiplying DACs; Package: SO; No of Pins: 16; Temperature Range: -40°C to 85°C SERIAL INPUT LOADING, 0.25 us SETTLING TIME, 12-BIT DAC, PDSO16
|
Linear Technology, Corp.
|
| LTC7541ABSWPBF LINEARTECHNOLOGYCORP-LTC7541ABSWTRP |
Improved Industry Standard CMOS 12-Bit Multiplying DAC; Package: SO; No of Pins: 18; Temperature Range: -40°C to 85°C
|
LINEAR TECHNOLOGY CORP
|
| ISL6840 ISL6840IBZ ISL6840IRZ-T ISL6840IUZ ISL6841 |
Improved Industry Standard Single-Ended Current Mode PWM Controller 1 A SWITCHING CONTROLLER, 2000 kHz SWITCHING FREQ-MAX, PDSO8
RES POWER .200 OHM 3.5W 5% SMT
|
Intersil, Corp.
INTERSIL[Intersil Corporation]
|
| ARE1303 ARE1303Z ARE1306 ARE1309 ARE1312 ARE1312Z |
RE-relay. 2.6 GHz 75 ohm relays for broadcasting industry. Standard PC board terminal. Nominal voltage 4.5 V DC.
2.6 GHZ 75з RELAYS FOR BROADCASTING INDUSTRY
2.6 GHz 75 RELAYS FOR BROADCASTING INDUSTRY
2.6 GHz 75?/a> RELAYS FOR BROADCASTING INDUSTRY
|
Matsushita Electric Works(Nais)
NAIS[Nais(Matsushita Electric Works)]
|
| SHM-4860 SHM-4860MC SHM-4860MM SHM-4860/883 |
Industry-Standard, High-Speed .01% Sample-Hold Amplifiers
Industry-Standard, High-Speed 0.01% Sample-Hold Amplifiers 工业标准，高速0.01％采样保持放大器
|
Electronic Theatre Controls, Inc.
|
| MCP41010MCP42010 MCP41050-I/P MCP41050-E/SN MCP410 |
Single/Dual Digital Potentiometer with SPI?/a> Interface
Single/Dual Digital Potentiometer with SPIInterface 双数字电位器接口与SPI
The MCP42100 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard ...
The MCP42010 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard ...
The MCP41100 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ ...
The MCP41010 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ ...
The MCP42100 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The
The MCP42050 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The
The MCP42010 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The
The MCP41100 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The MCP41100 ha
The MCP41050 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The MCP41050 ha
The MCP41010 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ serial interface. The wiper position varies linearly and is controlled via the SPI interface. The MCP41010 ha
400000 SYSTEM GATE 2.5 VOLT FPGA - NOT RECOMMENDED for NEW DESIGN
The MCP42050 digital potentiometer features two independent channels, 8-bit resolution (256 wiper steps), and an industry-standard ...
The MCP41050 single-channel digital potentiometer features 8-bit resolution (256 wiper steps), and an industry-standard SPI™ ...
IC,DIGITAL POTENTIOMETER,CMOS,DIP,8PIN,PLASTIC
Single/Dual Digital Potentiometer with SPI Interface
Single/Dual Digital Potentiometer with SPI?/a> Interface
Single/Dual Digital Potentiometer with SPI?Interface
|
Microchip Technology, Inc.
Microchip Technology Inc.
|
| MAC510027-32.768KHZ-G MACF510027-32.768KHZ-G MAC51 |
Industry Standard Package
|
MMD Components
|
| MAP MAP3025C48 MAP3025C48A MAP3025 MAP3020 MAP3020 |
Industry Standard Package
|
MMD Components
|
| MAH501027AH MAH501027BH MAH501027H MAHF205027AH MA |
Industry Standard Package
|
MMD Components
http://
|
| IRF7413PBF-1 IRF7413PBF-1-15 |
Industry-standard pinout SO-8 Package
|
International Rectifier
|
| IRF7821PBF-1 |
Industry-standard pinout SO-8 Package
|
International Rectifier
|
