| PART |
Description |
Maker |
| 5P6SMA 5P4SMA |
5A mold isolated SCR
From old datasheet system
P gate all Diffused mold type Thyristor granted 5 A on-state Average current, with rated Voltages up to 600V
|
NEC Electronics
NEC[NEC]
NEC Corp.
|
| PS21965-ST09 |
Dual-In-Line Package Intelligent Power Module TRANSFER-MOLD TYPE INSULATED TYPE
|
Mitsubishi Electric Semiconductor
|
| PS21312 |
Dual-In-Line Package Intelligent Power Module TRANSFER-MOLD TYPE INSULATED TYPE
|
Mitsubishi Electric Corporation
|
| PS21997-4 PS21997-4A PS21997-4C PS21997-4W |
Dual-In-Line Package Intelligent Power Module TRANSFER-MOLD TYPE INSULATED TYPE
|
Mitsubishi Electric Semiconductor
|
| PS21993-4 PS21993-4A PS21993-4C PS21993-4W |
Dual-In-Line Package Intelligent Power Module TRANSFER-MOLD TYPE INSULATED TYPE
|
Mitsubishi Electric Semiconductor
|
| PS21964-ST09 |
Dual-In-Line Package Intelligent Power Module TRANSFER-MOLD TYPE INSULATED TYPE
|
Mitsubishi Electric Semiconductor
|
| UPA828 UPA828TF UPA828TF-T1 |
HIGH-FREQUENCY LOW-NOISE AMPLIFIER NPN SILICON EPITAXIAL TWIN TRANSISTOR WITH BUILT-IN 6-PIN 2 x 2SC5184 THIN-TYPE SMALL MINI MOLD
|
NEC[NEC]
|
| NNCD68PH NNCD6.8PH NNCD6.8PH-T2 NNCD6.8PH-T1 |
LOW CAPACITANCE TYPE ELECTROSTATIC DISCHARGE NOISE CLIPPING DIODE QUARTO TYPE: COMMON ANODE 5-PIN SUPER SMALL MINI MOLD 低电容式静电放电二极管噪声裁剪季刊类型：共阳引脚超小微型模具
ESD noise clipping diode 5pin SC-88A
|
NEC, Corp.
NEC Corp.
NEC[NEC]
|
| RPI-243 |
Photointerrupter/ double-layer mold type
PHOTOINTERRUPTER, DOUBLE-LAYER MOLD TYPE
Sensors > Photointerrupters > Linear Phototransistor output
|
Rohm CO.,LTD.
|
| 03P4J |
(03PxJ) ALL DIFFUSED TYPE SCR POWER MINI MOLD
|
NEC
|
| FN1A4Z FN1A4Z-L FN1A4Z-T2B FN1A4ZM69 |
100 mA, 50 V, PNP, Si, SMALL SIGNAL TRANSISTOR MINIMOLD, SC-59, 3 PIN
MEDIUM SPEED SWITCHING RESISTOR BUILT-IN TYPE PNP TRANSISTOR MINI MOLD
Compound transistor
|
Honeywell International, Inc.
NEC
|
| UPA836TF UPA836TF-T1 PA836TF |
NPN Silicon Epitaxial Transisitor(NPN外延晶体
NPN SILICON EPITAXIAL TRANSISTOR WITH 2 DIFFERENT ELEMENTS IN A 6-PIN THIN-TYPE SMALL MINI MOLD PACKAGE
|
NEC Corp.
|
