| PART |
Description |
Maker |
| GD420SD |
The GD420SD is designed for low power rectification.
The GD420SD is designed for low power rectification.
|
E-Tech Electronics LTD
|
| REC-14LA REC-16LA |
Precision Linear Transducers, Designed for Mounting in Hydraulic or Pneumatic Cylinder, Conductive Plastic Element, Designed for High Pressure Chamber of Cylinders, Equipped with Glass-Sealed Electrical Outputs
|
Vishay
|
| IR1150 IR1150PBF IR1150ISTRPBF |
One Cycle Control PFC IC designed to operate in continuous conduction mode (CCM), designed and qualified for the Consumer market
One Cycle Control PFC IC designed to operate in continuous conduction mode (CCM), designed and qualified for the Industrial market.
|
International Rectifier
|
| MAS1215-33 MAS1220-33 |
Equipment Designed to Conform EMI Regulations Such As VCCICISPRFCCVDEetc
Equipment Designed to Conform EMI Regulations Such As VCCI,CISPR,FCC,VDE,etc
|
LAMBDA[DENSEI-LAMBDA]
|
| LD1207 |
The LD1207 is specifically designed for LED DISPLAY drivers
The LD1207 is specifically designed for LED DISPLAY drivers
|
List of Unclassifed Manufacturers
ETC[ETC]
|
| CY38030V208-125NC CY38030V208-125NI CY38030V256-12 |
Programmable Logic : Programmable Logic Devices
CPLD designed for migration. Speed 83 MHz.
CPLD designed for migration. Speed 125 MHz.
|
Cypress
|
| P0080SAMCLRP P0300SAMCLRP P2100SCMCLRP P0300SCMCLR |
MC Series DO-214 are low capacitance SIDACtor庐 devices designed to protect
MC Series DO-214 are low capacitance SIDACtor? devices designed to protect
|
Littelfuse
|
| 2SD1384 2SD1930 2SB1505 2SD2004 2SD1809 2SA1619 2S |
1.2W PACKAGE POWER TAPED TRANSISTOR DESIGNED FOR USE WITH AN AUTOMATIC PLACEMENT MECHINE
From old datasheet system
1.2W PACKAGE POWER TAPED TRANSISTOR DESIGNED FOR USE WITH AN AUTOMATIC PLACEMENT MECHINE .2W封装形式的录音晶体管设计为与安使用自动配置MECHINE
2SD1929
|
ROHM[Rohm]
ETC
Nais(Matsushita Electric Works)
Rohm CO.,LTD.
Rohm Co., Ltd.
|
| 215025 215.500XE 0215002.H- 215002.XE 0215002.H-ND |
5 x 20 mm Time Lag Fuse (Slo-Blo Fuse)
Axial Lead and Cartridge Fuses - Designed to IEC Standard
Axial Lead and Cartridge Fuses - Designed to IEC Standard
|
Littelfuse, Inc.
|
| MZS1220-33 MZS1206 MZS1206-33 MZS1210-33 MZS1215-3 |
Equipment Designed to Conform EMI Regulations Such As VCCI /CISPR /FCC /VDE /etc
Equipment Designed to Conform EMI Regulations Such As VCCI,CISPR,FCC,VDE,etc 设备设计符合EMI规范，如VCCI，CISPR，催化裂化，德国VDE
|
M.G. Chemicals
LAMBDA[DENSEI-LAMBDA]
http://
|
| 7344-V2C3-AQTB 7344_V2C3-AQTB 7344/V2C3-AQTB |
Specially designed for applications
|
Everlight Electronics Co., Ltd
|
| SF2037B |
Designed for SDARS IF Receiver
|
RF Monolithics, Inc
|
