PART |
Description |
Maker |
TS02A-17 |
NON-INDUCTIVE, COATED WITH EPOXY RESIN OR FLAME RETARDANT EPOXY POWER
|
Suntan Capacitors
|
MKZI10 |
vibration and thermal shock meets en61373
|
Minmax Technology Co., ...
|
MX619J MX619 |
Delta Modulation Codec meets EUROCOM D1-IA8
|
CMLMICRO[CML Microcircuits]
|
TF-PER-U00 |
Meets Performance Requirements for Audio On PC99/2001 System
|
AAEON Technology
|
SR560 SR520 SR540 SR530 SR550 |
5.0 Amp SCHOTTKY BARRIER RECTIFIERS MEETS UL SPECIFICATION 94V-0
|
First Components International First Components Internatio...
|
683MPR250K 684MPR250K 223MPR250K 224MPR250K 104MPR |
105°C Metallized Polypropylene Epoxy Dipped Radial Lead Capacitors 105掳C Metallized Polypropylene Epoxy Dipped Radial Lead Capacitors 105隆?C Metallized Polypropylene Epoxy Dipped Radial Lead Capacitors
|
Illinois Capacitor, Inc.
|
PM8355 |
Short Form PMC-2000791 PM8355 QuadPHY-II 4-Channel 2.125| 2.5 to 3.125 Gbit/s Transceiver with Half-rate Support Short Form Data Sheet [92 kB] 短表PMC - 2000791 PM8355 QuadPHY - 2 4通道2.125 | 2.5.125 Gbit / s的收发器采用半速率支持简表数据表[92 kB]
|
Applied Micro Circuits, Corp.
|
AWT6251 |
The AWT6251 meets the increasing demands for higher output power in 3GPP Wireless handsets.
|
Anadigics Inc
|
MAX5873 MAX5874 MAX5875 MAX5876 MAX5877 MAX5878 MA |
Quadruple Line Driver 14-CDIP -55 to 125 12位200Msps、高动态性能、双路DAC,CMOS输入 16-Bit, 250Msps, High-Dynamic-Performance, Dual DAC with LVDS Inputs Replaced by SN55189A : Quadruple Line Receiver 14-CDIP -55 to 125 Quadruple Line Driver 14-CFP -55 to 125 Quadruple Line Driver 20-LCCC -55 to 125
|
MAXIM - Dallas Semiconductor Maxim Integrated Products, Inc.
|
N83C51RC-24 N87C51RC-24 TN80C51RA-24 TN83C51RA-24 |
8-BIT MICROCONTROLLER CA LC-LC CLIPPED 62.5/125 5M CA SC-SC 62.5/125 DPX YLW 3M CA SC-SC 62.5/125 DPX YLW 15M 8位微控制
|
8位微控制 Data Delay Devices, Inc.
|
C1676 |
Approved for use with GlobeSpan HDSL2 Chip Set Meets the requirements of IEC60950 for supplementary insulation, 250V working voltage
|
Electronic Theatre Controls, Inc. ETC[ETC] CoEv Inc
|
C1658 |
Approved for use with Conexant ADSL Chip Set Meets requirements of IEC950 for supplementary insulation, 250V working voltage
|
Electronic Theatre Controls, Inc. ETC[ETC] CoEv Inc
|