| PART |
Description |
Maker |
| AWT6130 |
The AWT6130 provides the additional output power margin RF designers need to overcome additional post-PA insertion loss in tri-mode ...
Cellular Dual Mode AMPS/CDMA 3.5V 29dBm Power Amplifier Module
|
Anadigics Inc
ANADIGICS, Inc
|
| MC68HC908JB8 MC68HC08JB8AJP MC68HC08JB8A MC68HC08J |
This addendum provides additional information
|
FREESCALE[Freescale Semiconductor, Inc]
|
| AT91M40800NBSP |
Attention: additional NWAIT constraints for the AT91M40800
|
Atmel Corp
|
| EFM32ZG222F4-QFP48T |
Updated specifications based on the results of additional silicon characterization.
|
Silicon Laboratories
|
| TC2030-MCP-FP |
TRACE AND VIA KEEP OUT AREA ADDITIONAL NO VIAS WITHIN 0.020 OF ANY CONTACT PAD
|
Microchip Technology
|
| EFM32WG995F128-BGA120 EFM32WG995F256-BGA120 EFM32W |
Updated specifications based on the results of additional silicon characterization
|
Silicon Laboratories
|
| CBTL06DP212 CBTL06DP212EE |
CBTL06DP212 provides an additional level of multiplexing of AUX and DDC signals delivering true flexibility and choice.
|
NXP Semiconductors
|
| ADM489 ADM488 |
Low Power, Slew Rate Limited RS-485, Contains an Additional Receiver and Driver Enable Control
|
Analog Devices
|
| PS222S |
3-Channel Secondary Monitoring IC With Over-Current Protection And an Additional 12V OCP Channel
|
List of Unclassifed Manufacturers
SiTi
ETC[ETC]
|
| 0603YC102K4Z4A 0603YC102M4Z4A 0603YC102J4Z4A 0603Y |
CAPACITOR, CERAMIC, MULTILAYER, 16 V, X7R, 0.001 uF, SURFACE MOUNT, 0603 CHIP, ROHS COMPLIANT
CAPACITOR, CERAMIC, MULTILAYER, 16 V, X7R, 0.01 uF, SURFACE MOUNT, 0603 CHIP, ROHS COMPLIANT
MLCC with FLEXITERM?
With increased requirements from the automotive industry for additional component robustness, AVX recognized the need to produce a MLCC with enhanced mechanical strength.
MLCC with FLEXITERM General Specifications
With increased requirements from the automotive industry for additional component robustness, AVX recognized the need to produce a MLCC with enhanced mechanical strength.
MLCC with FLEXITERM
MLCC with FLEXITERM General Specifications
With increased requirements from the automotive industry for additional component robustness, AVX recognized the need to produce a MLCC with enhanced mechanical strength.
|
AVX, Corp.
AVX Corporation
|
| SD88205 |
Additional testing can be offered upon request
|
Sangdest Microelectroni...
|
