PART |
Description |
Maker |
ISL9211BIRU58XZ-T |
Charging System Safety Circuit
|
Intersil Corporation
|
MM1332 |
Control of Lithium Ion Batteries Charging (one cell ~ three cells) From old datasheet system
|
Mitsumi
|
F1755 |
Non Fused Earthed Inductors (acc. to German Safety Regulations) From old datasheet system
|
Vishay
|
MCRF250 MCRF250-I_WFQ23 MCRF250-I_P MCRF250-I_S MC |
The MCRF250 is one time contactlessly programmable passive Radio Frequency Identification (RFID) IC device with advanced anti-collision features. The device is powered by an external RF transmitter (reader) through inductive coupling. The 125 kHz microID Passive RFID Device with Anti-Collision From old datasheet system
|
MICROCHIP[Microchip Technology]
|
D4DL-2DFJ-E D4DL D4DL-1CFA-B D4DL-1CFA-E D4DL-1CFB |
Compact Guard-locking Interlock Safety Door Switch 紧凑卫队锁安全门开关联 From old datasheet system
|
Electronic Theatre Controls, Inc. Omron ETC[ETC] List of Unclassifed Manufacturers http://
|
CXD3030 |
System-on-a-Chip (SoC) Device Supports 48′ Speed CD-ROM Drives System-on-a-Chip (SoC) Device Supports 48? Speed CD-ROM Drives System-on-a-Chip (SoC) Device Supports 48 Speed CD-ROM Drives System-on-a-Chip (SoC) Device Supports 48Speed CD-ROM Drives 系统级芯片(SoC)的设备支持48?速度CD - ROM驱动
|
Sony Corporation Sony, Corp.
|
LC5512MC-75F256C LC5512MC-45F256C LC5512MC-75F484C |
3.3V, 2.5V and 1.8V In-System Programmable eXpanded Programmable Logic Device XPLDFamily 3.3.5V1.8V在系统可编程扩展可编程逻辑器件XPLD⑩家 3.3V, 2.5V and 1.8V In-System Programmable eXpanded Programmable Logic Device XPLD??Family
|
Lattice Semiconductor Corporation Lattice Semiconductor, Corp.
|
MCP100T-270I_TT MCP100T-300I_TT MCP100T-315I_TT MC |
1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3 The MCP100 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ... The MCP101 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ... The MCP101 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d The MCP100 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d CPU / System Supervisors Microcontroller Supervisory Circuit with Push-Pull Output
|
MICROCHIP[Microchip Technology] Microchip Technology Inc. Microchip Technology, Inc.
|
MB3875 MB3877 MB3875PFV |
DC/DC Converter IC for Charging
|
FUJITSU[Fujitsu Media Devices Limited] Fujitsu Microelectronics
|
MB3832A03 |
DC/DC Converter IC for Charging
|
Fujitsu Component Limited.
|
WR221230-36M8-G |
Wireless Charging
|
TDK Electronics
|
MB3874 |
DC/DC Converter IC for Parallel Charging
|
Fujitsu Limited
|