| PART |
Description |
Maker |
| HFBR-5921L HFBR-5923L |
FIBER OPTIC TRANSCEIVER, 830-860nm, 2125Mbps(Tx), 2125Mbps(Rx), THROUGH HOLE MOUNT, LC CONNECTOR
Fibre Channel 2.125/1.0625 GBd 850 nm Small Form Factor Pin Through Hole (PTH) Low Voltage (3.3 V) Optical Transceiver
|
AVAGO TECHNOLOGIES LIMITED
|
| PE44220 |
2.4mm Male Connector Solder Attachment 2 Hole Flange Pin Terminal, .481 inch Hole Spacing
|
Pasternack Enterprises, Inc.
|
| BCM-5554 |
THROUGH HOLE COMMON MODE CHOKE
|
Bothhand USA, LP.
|
| BCM-5950 |
THROUGH HOLE COMMON MODE CHOKE
|
Bothhand USA, LP.
|
| BCM-7501 |
THROUGH HOLE COMMON MODE CHOKE
|
Bothhand USA, LP.
|
| NNCD68PH NNCD6.8PH NNCD6.8PH-T2 NNCD6.8PH-T1 |
LOW CAPACITANCE TYPE ELECTROSTATIC DISCHARGE NOISE CLIPPING DIODE QUARTO TYPE: COMMON ANODE 5-PIN SUPER SMALL MINI MOLD 低电容式静电放电二极管噪声裁剪季刊类型：共阳引脚超小微型模具
ESD noise clipping diode 5pin SC-88A
|
NEC, Corp.
NEC Corp.
NEC[NEC]
|
| GE04 |
Res Thick Film NET 4.7K Ohm 2% 1.92W ±100ppm/C BUS Molded 16-Pin DIP Pin Thru-Hole Tube
|
Vishay Dale
|
| NNCD68PL NNCD6.8PL |
5-PIN SUPER SMALL MINI MOLD FLAT LEAD TYPE ELECTROSTATIC DISCHARGE NOISE CLIPPING DIODE QUAD TYPE: COMMON ANODE 5针超小微型模具扁平引线式静电放电二极管噪声裁剪四型：共阳
ESD noise clipping diode 5pin XSOF(flat-lead type)
|
NEC, Corp.
NEC[NEC]
|
| CM0090Q0504CT |
Surface mount common mode filter with a small size of 1.25 X 1.00 X 0.80 mm, RoHS compliant.
|
Frontier Electronics.
|
| CM0100Q0504BT |
Surface mount common mode filter with a small size of 1.25 X 1.0 X 0.80 mm, RoHS compliant.
|
Frontier Electronics.
|
| CM0090Q0504ET |
Surface mount common mode filter with a small size of 1.25 X 1.00 X 0.80 mm, RoHS compliant.
|
Frontier Electronics.
|
