| PART |
Description |
Maker |
| F-LBAND-TX F-LBAND-RX |
Typical L-BAND-Rx/Tx Application
|
THOR communications
|
| KHB2475B01 |
DIELECTRIC BAND PASS FILTER (TYPICAL PASSBAND CHARACTERISTIC)
US-C/P
|
KEC Holdings
KEC[KEC(Korea Electronics)]
Korea Electronics (KEC)
|
| KHB2475A01 |
US-C/P
DIELECTRIC BAND PASS FILTER (TYPICAL PASSBAND CHARACTERISTIC)
|
Korea Electronics (KEC)
KEC[KEC(Korea Electronics)]
|
| KHB2403A01 |
US-C/P
DIELECTRIC BAND PASS FILTER (TYPICAL PASSBAND CHARACTERISTIC)
|
Korea Electronics (KEC)
KEC[KEC(Korea Electronics)]
|
| KHB2403B01 |
US-C/P
DIELECTRIC BAND PASS FILTER (TYPICAL PASSBAND CHARACTERISTIC)
|
Korea Electronics (KEC)
KEC[KEC(Korea Electronics)]
|
| KHB0959A01 |
CT1
DIELECTRIC BAND PASS FILTER (TYPICAL PASSBAND CHARACTERISTIC)
|
Korea Electronics (KEC)
KEC[KEC(Korea Electronics)]
|
| AD7294NBSP |
12-Bit, Multichannel, DAC/ADC Temperature Sensor and Current Sense for Monitor and Control Applicati
|
Analog Devices
|
| 2SD1631 |
Transistor Silicon NPN Epitaxial Type (PCT process) (Darlington power transistor) Micro Motor Drive Hammer Drive Applications Switching Applicati
|
TOSHIBA
|
| FMCE-0528 FMCE-0528-TR |
Attenuation to 60 dB at 500 kHz, typical Operating temperature -55掳 to 125掳C
Attenuation to 60 dB at 500 kHz, typical Operating temperature -55° to 125°C
|
Interpoint Corporation Company
|
| MCP6542 MCP6542-I/MS MCP6542-I/P MCP6542-I/SN MCP6 |
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current ...
Push-Pull Output Sub-Microamp Comparators
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the 16 lead PDIP, SOIC and 14 lead TSSOP pack
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package,
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package.
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC, MSOP and five le
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current ...
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
From old datasheet system
IC,VOLT COMPARATOR,DUAL,CMOS,TSSOP,8PIN,PLASTIC
|
Microchip Technology Inc.
|
| 3B-850A |
TYPICAL OPERATIONG CONDITIONS
|
http://
|
