| PART |
Description |
Maker |
| AN1330 |
DESIGNING WITH L5970D, 1A HIGH EFFICIENCY DC/DC CONVERTER
|
SGS Thomson Microelectronics
|
| AN732 |
GPIB Controller for ZUP series RoHS Compliant: Yes
Designing A High-Voltage Non-Isolated Buck-Boost Converter with the Si9121DY
|
Vishay Intertechnology,Inc.
Vishay Siliconix
|
| AN1031 |
Considerations in Designing
|
Fairchild Semiconductor
|
| AN1406/D |
DESIGNING WITH PECL (ECL AT 5.0)
|
ON Semiconductor
|
| XC2064 |
Designing FPGAs with HDL
|
Xilinx
|
| AN1422 |
DESIGNING WITH FLASH MEMORY
|
SGS Thomson Microelectronics
|
| AN-4153 |
Designing Asymmetric PWM Half-Bridge Converters
|
http://
|
| CMX589AMX909AMX029 |
Using Two-Point Modulation to Reduce Synthesizer Problems When Designing DC-Coupled GMSK Modulators
|
CONSUMER MICROCIRCUITS LIMITED
|
| AN709 |
Designing with the Si9976DY N-Channel Half-Bridge Driver and LITTLE FOOT Dual MOSFETs
|
VISAY[Vishay Siliconix]
|
| D1B121000 |
Dip type construction with the same terminal pitch as ICs or TTLs simplifies PC board designing.
|
COSMO[COSMO Electronics Corporation]
|
| AN1499 |
ST9 - DESIGNING A LOW COST POWER BOARD FOR THE ST92141 MOTOR CONTROL MCU WITHOUT USING IPMS
|
SGS Thomson Microelectronics
|
