| PART |
Description |
Maker |
| AN1406/D |
DESIGNING WITH PECL (ECL AT 5.0)
|
ON Semiconductor
|
| XC2064 |
Designing FPGAs with HDL
|
Xilinx
|
| AN939 |
Designing Energy Meters with the PIC16F873A
|
Microchip Technology Inc.
|
| AN603 |
Designing With the Si9978DW Configurable H-Bridge Controller
|
Vishay Siliconix
|
| AN-502 |
Designing a Superheterodyne Receiver Using an IF Sampling Diversity Chipset
|
Analog Devices
|
| SAWX4A0X |
Designing with Acriche A4 Connect using a siple diode bridge directly to AC power
|
Seoul Semiconductor
|
| AN667 |
DESIGNING A HIGH POWER FACTOR SWITCHING PREREGULATOR WITH THE L6560/A TRANSITION MODE I.C.
|
ST Microelectronics
|
| D1B121000 |
Dip type construction with the same terminal pitch as ICs or TTLs simplifies PC board designing.
|
COSMO[COSMO Electronics Corporation]
|
| AN1536 |
DESIGNING APPLICATIONS THAT WORK WITH ANY M25PXX DEVICE TAKING ADVANTAGE OF THEIR HARDWARE AND SOFTWARE COMPATIBILITY
|
SGS Thomson Microelectronics
|
| AXK780147G AXK780247G AXK780347G AXK850245WG AXK85 |
Narrow pitch connectors (0.4mm pitch) Construction makes designing devices easier.
|
Panasonic Semiconductor
|
