| PART |
Description |
Maker |
| TC115501EMTTR TC115 TC115301ECT TC115301EMTTR TC11 |
The TC115 is a high-efficiency step-up DC/DC converter for small, low input voltage or battery powered sys-tems. This device has ...
The TC115 is a high-efficiency step-up DC/DC converter for small, low input voltage or battery powered sys-tems. This device has a guaranteed start-up voltage of 0.9V and a typical supply current of 80 µA. Phase compensation and soft-
PFM/PWM Step-Up DC/DC Converter
|
MICROCHIP[Microchip Technology]
|
| LS6525 |
BATTERY POWERED LOW-POWER PIR SENSOR INTERFACE
|
LSI
|
| SN90RC-4 |
4 Analog Channel, Battery Powered Wireless Sensor Node
|
Murata Manufacturing Co...
|
| HYB18L256160BC-7.5 HYE18L256160BC-7.5 HYB18L256160 |
Very low Power SDRAM optimized for battery-powered, handheld applications
|
Infineon
|
| PHK04P02T10 PHK04P02T |
P-channel vertical D-MOS logic level FET Battery powered applications
|
NXP Semiconductors
|
| SX12821075 SX1282 |
Transceiver/MCU/ADC System-on-Chip with RISC CPU for Battery-Powered Ultra-Low Power Applications
|
Semtech Corporation
|
| 452-K34-LN2-70A 452-K34-LN2-100A 452-K34-LN2-80A 4 |
Extra low voltage wiring systems on all types of vehicle for land, sea and air; defence equipment; battery powered machines.
|
ETAL Group
|
| PJ3100 |
7V; 300mA CMOS LDO with enable. For battery-powered devices, personal communication devices
|
PROMAX-JOHNTON
|
| 1B21-15 |
Isolated, Loop-Powered Voltage-to-Current Converter
|
Analog Devices
|
| PI3USB10LP-AZLE |
USB 2.0 High-Speed (480 Mbps) Signal Switch Targeted for Battery Powered Applications 的USB 2.0高速的电池供电应用80 Mbps）的信号开关目
|
Pericom Semiconductor, Corp.
|
| WU400 WU100 WU101 WU102 WU103 WU104 WU105 WU106 WU |
DC/DC converter, 10/15 watts. 4:1 input range. Input voltage 4.5-6.0 VDC. Output voltage -12.0 VDC. Output current -400 mA. Input current 10 mA(no load), 2520 mA(full load).
DC/DC converter, 10/15 watts. 4:1 input range. Input voltage 4.5-6.0 VDC. Output voltage -15.0 VDC. Output current -333 mA. Input current 10 mA(no load), 2510 mA(full load).
DC/DC converter, 10/15 watts. 4:1 input range. Input voltage 4.5-6.0 VDC. Output voltage 15.0 VDC. Output current 667 mA. Input current 10 mA(no load), 2510 mA(full load).
DC/DC converter, 10/15 watts. 4:1 input range. Input voltage 4.5-6.0 VDC. Output voltage 3.3 VDC. Output current 3000 mA. Input current 10 mA(no load), 2470 mA(full load).
10/15 Watts WU Series 10/15瓦吴系列
Nickel Cadmium Battery; Voltage Rating:1.2V; Battery Size Code:Sub C; Battery Capacity:2100mAh
Nickel Cadmium Battery; Voltage Rating:1.2V; Battery Size Code:Sub C; Battery Capacity:1900mAh; Battery Terminals:Pressure Contact
DC/DC converter, 10/15 watts. 4:1 input range. Input voltage 4.5-6.0 VDC. Output voltage 5.0 VDC. Output current 2000 mA. Input current 10 mA(no load), 2620 mA(full load).
DC/DC converter, 10/15 watts. 4:1 input range. Input voltage 4.5-6.0 VDC. Output voltage 12.0 VDC. Output current 800 mA. Input current 10 mA(no load), 2520 mA(full load).
DC/DC converter, 10/15 watts. 4:1 input range. Input voltage 4.5-6.0 VDC. Output voltage -5.0 VDC. Output current -1000 mA. Input current 10 mA(no load), 2620 mA(full load).
|
XPiQ
Electronic Theatre Controls, Inc.
ETC[ETC]
List of Unclassifed Manufacturers
International Power Sources
|
