| PART |
Description |
Maker |
| CF5029A-2 CF5029A |
Divide-by-512 Frequency Output, Crystal Oscillator Module IC
|
Nippon Precision Circuits Inc
|
| HMC530LP511 HMC530LP5E |
MMIC VCO w/ HALF FREQUENCY OUTPUT & DIVIDE-BY-4, 9.5 - 10.8 GHz
|
Hittite Microwave Corporation
Hittite Microwave Corpo...
|
| HMC531LP5 HMC531LP5E |
MMIC VCO W/ HALF FREQUENCY OUTPUT & DIVIDE-BY-4, 13.6 - 14.9 GHZ
|
Hittite Microwave Corporation
|
| HMC582LP511 |
MMIC VCO w/ HALF FREQUENCY OUTPUT & DIVIDE-BY-4, 11.1 - 12.4 GHz
|
Hittite Microwave Corporation
|
| HMC584LP510 584LP5E HMC584LP5E |
MMIC VCO w/ HALF FREQUENCY OUTPUT & DIVIDE-BY-4, 12.5 - 13.9 GHz
|
Hittite Microwave Corporation
Hittite Microwave Corpo...
|
| HMC584LP5 HMC584LP5E |
MMIC VCO w/ HALF FREQUENCY OUTPUT & DIVIDE-BY-4, 12.5 - 13.9 GHz
|
Hittite Microwave Corporation
|
| R1210N361D-TR R1210N361C-TL R1210N361D-TL R1210N36 |
PWM step-up DC/DC converter. Output voltage 2.3V. Oscillator frequency 100kHz with a frequency change-over cicuit. Taping specification TL
PWM step-up DC/DC converter. Output voltage 2.3V. Oscillator frequency 100kHz with a frequency change-over cicuit. Standard taping specification TR
PWM step-up DC/DC converter. Output voltage 2.3V. Oscillator frequency 100kHz without a frequency change-over cicuit. Standard taping specification TR
PWM step-up DC/DC converter. Output voltage 2.3V. Oscillator frequency 180kHz without a frequency change-over cicuit. Taping specification TL
PWM step-up DC/DC converter. Output voltage 2.3V. Oscillator frequency 180kHz without a frequency change-over cicuit. Standard taping specification TR
PWM step-up DC/DC converter. Output voltage 2.4V. Oscillator frequency 100kHz with a frequency change-over cicuit. Taping specification TL
PWM step-up DC/DC converter. Output voltage 2.4V. Oscillator frequency 100kHz with a frequency change-over cicuit. Standard taping specification TR
PWM step-up DC/DC converter. Output voltage 2.4V. Oscillator frequency 100kHz without a frequency change-over cicuit. Standard taping specification TR
PWM step-up DC/DC converter. Output voltage 2.4V. Oscillator frequency 180kHz without a frequency change-over cicuit. Standard taping specification TR
PWM step-up DC/DC converter. Output voltage 2.5V. Oscillator frequency 100kHz with a frequency change-over cicuit. Standard taping specification TR
PWM step-up DC/DC converter. Output voltage 2.5V. Oscillator frequency 100kHz without a frequency change-over cicuit. Taping specification TL
PWM step-up DC/DC converter. Output voltage 2.5V. Oscillator frequency 100kHz with a frequency change-over cicuit. Taping specification TL
PWM step-up DC/DC converter. Output voltage 2.4V. Oscillator frequency 180kHz without a frequency change-over cicuit. Taping specification TL
PWM step-up DC/DC converter. Output voltage 2.4V. Oscillator frequency 100kHz without a frequency change-over cicuit. Taping specification TL
PWM step-up DC/DC converter. Output voltage 2.3V. Oscillator frequency 100kHz without a frequency change-over cicuit. Taping specification TL
PWM Step-up DC/DC Converter
CAP 22PF 200V 5% NP0(C0G) DIP-2 TUBE-PAK S-MIL-PRF-39014/22
CAP 0.47UF 50V 10% X7R DIP-2 TUBE-PAK R-MIL-PRF-39014/22 SWITCHING REGULATOR, 216 kHz SWITCHING FREQ-MAX, PDSO5
SMPS Controller 开关电源控制器
|
Ricoh Co., Ltd.
EPCOS AG
Maxim Integrated Products, Inc.
RICOH electronics devic...
|
| 7490 |
Package Contains a Divide-by-Two and a Divide-by-Five Counter
|
List of Unclassifed Manufacturers
ETC[ETC]
Electronic Theatre Controls, Inc.
|
| MC100EL07DTR2 MC100EP33DR2 MC100EL38 |
5V ECL 2-Input XOR/XNOR
3.3V / 5V ECL ÷4 Divider
5V ECL Divide by 2, Divide by 4/6 Clock Generation Chip
|
ON Semiconductor
|
| TC9402 TC9400 TC9402CPD TC9400COD TC9400CPD TC9400 |
The TC9400/TC9401/TC9402 are low-cost voltage-to-frequency (V/F)converters utilizing low power CMOS technology. The converters accept a variable analog input signal and generate an output pulse train whose frequency is linearly proportiona
Voltage-to-Frequency/Frequency-to-Voltage Converters
|
Microchip Technology
|
