| PART |
Description |
Maker |
| MCP606-I/P MCP606-I/SN MCP606-I/ST MCP609-I/P MCP6 |
The MCP606 operational amplifier (op amp) has a gain bandwidth product of 155 kHz with a low typical operating current of 18.7 and ...
The MCP609 quad operational amplifier (op amp) has a gain bandwidth product of 155 kHz with a low typical operating current of 18.7 ...
The MCP608 operational amplifier (op amp) has a gain bandwidth product of 155 kHz with a low typical operating current of 18.7 and ...
The MCP607 dual operational amplifier (op amp) has a gain bandwidth product of 155 kHz with a low typical operating current of 18.7 ...
2.5V TO 5.5V MICROPOWER CMOS OP AMPS
|
Microchip Technology Inc.
|
| CBT3306D-T CBT3306GM |
Dual bus switch - # of Bits per Enable: 1 ; Description: Bus Switch ; Number of bits: 2 ; Operating temperature: -40~85 Cel; Operating voltage: 4.5~5.5 VDC CBT/FST/QS/5C/B SERIES, DUAL 1-BIT DRIVER, TRUE OUTPUT, PDSO8
|
NXP Semiconductors N.V.
|
| MCP6002 MCP6002EP MCP6002ESN MCP6004 MCP6004E MCP6 |
The MCP6002 is a dual general purpose op amp offering rail to rail input & output over the 1.8 to 5.5V operating range. This amplifier has a typical GBWP of 1 MHz with typical quiescent current of 100 microamperes. The MCP6002 is avail
Operational Amplifier - Datasheet Reference
1 MHz Bandwidth Low Power Op Amp
The MCP6001 is a single general purpose op amp offering rail to rail input & output over the 1.8 to 5.5V operating range. This amplifier has a typical GBWP of 1 MHz with typical quiescent current of 100 microamperes. The MCP6001 is ava
|
Microchip Technology Inc
MICROCHIP[Microchip Technology]
|
| PI3A3160C |
3.0V, SOTiny?/a> 0.8Ω Dual SPDT Analog Switch with -1.0V to 4.2V Operating Range
3.0V, SOTiny⑩ 0.8ヘ Dual SPDT Analog Switch with -1.0V to 4.2V Operating Range
|
Pericom Semiconductor Corporation
|
| FA-1307-5 |
Operating Voltage= 115/240 Vac Operating Current Max= 5.0 amp
|
JMK Inc.
|
| ZG-1435-5B |
Operating Voltage = 125/250 Vac Operating Current = 5.0 Ampere
|
JMK Inc.
|
| FF-1069A-3B |
Operating voltage = 125 / 250 Vac Operating current = 3 Amps
|
JMK Inc.
|
| ZG-1435-1B |
Operating Voltage = 125/250 Vac Operating Current = 1.0 Ampere
|
JMK Inc.
|
| AA-0221-20B |
Operating voltage = 115/250 Vac Operating current = 20 Amp
|
JMK Inc.
|
| FF-1319-13 |
Operating Voltage = DC to 250 Vac Operating Current (Max)= 13A
|
JMK Inc.
|
| DN8899S DN8899TE DN8899SE |
Hall IC (Operating Temperature Range Topr=-40 to 100C, Operating in Alternative Magnetic Field)
|
Panasonic
|
| DN6846S |
Hall IC (Operating Supply Voltage Range Vcc=3.6 to 16V, Operating in Alternative Magnetic Field)
|
Panasonic
|
