| PART |
Description |
Maker |
| P0502NL P0527NL P0429NL P0422NL P0420NL P0421NL P0 |
Designed for DC/DC converters, Wide variety of inductor sizes and current ratings available
Solutions based on impedance, size and current, Designed for DC/DC converters, Dielectric strength: 1000VRMS
|
Pulse A Technitrol Company
|
| TC1029EUA TC1029 TC1029EOA TC1029EPA |
The TC1029 is a dual, CMOS operational amplifier designed for low-power applications. It is designed specifically for operation from ...
The TC1029 is a dual, CMOS operational amplifier designed for low-power applications. It is designed specifically for operation from a single supply, however, operation from dual supplies is also possible, and the power supply current drai
Linear Building Block - Dual Low Power Op Amp
|
MICROCHIP[Microchip Technology]
|
| H5120NL H5120NLT |
1000base -t magnetics module Designed to Support Gigabit Transceivers
1000base -t magnet ics module Designed to Support Gigabit Transceivers
|
Pulse A Technitrol Company
|
| PE-53112NL PE-53113NL PE-52626 |
Inductors Designed for National’s 50 kHz Simple Switcher
Inductors Designed for Nationals 50 kHz Simple Switcher
|
Pulse A Technitrol Company
|
| MCP100T-270I_TT MCP100T-300I_TT MCP100T-315I_TT MC |
1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3
The MCP100 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ...
The MCP101 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ...
The MCP101 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d
The MCP100 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d
CPU / System Supervisors
Microcontroller Supervisory Circuit with Push-Pull Output
|
MICROCHIP[Microchip Technology]
Microchip Technology Inc.
Microchip Technology, Inc.
|
| GSM31P256KB-I66 GSM31P512KB-I66 |
x64 Interleaved Burst Mode SRAM Module
256KB Secondary Cache Module Designed For Use With Intel Pen-tium CPU based system(用于英特尔奔腾处理器系统56KB二级高速缓冲存储器)
512KB Secondary Cache Module Designed For Use With Intel Pen-tium CPU based system(用于英特尔奔腾处理器系统12KB二级高速缓冲存储器)
|
GSI Technology
|
| PBP-3201 PBP-3201-22 PBP-3202-22 PBP-3203-22 PBP-3 |
Equipment Designed to Conform EMI Regulations Such As VCCICISPRFCCVDEetc
EQUIPMENT DESIGNED TO CONFORM EMI REGULATIONS SUCH AS VCCI,CISPR,FCC,VDE,ETC
Equipment Designed to Conform EMI Regulations Such As VCCI/CISPR/FCC/VDE/etc
KPT 10C 10#20 PIN PLUG
KPTC 10C 10#20 SKT PLUG
KPTC 6C 6#20 SKT PLUG
KPTC 8C 8#20 PIN PLUG
|
http://
LAMBDA[DENSEI-LAMBDA]
|
| GSM14P256KB-I66 GSM14P512KB-I66 |
256KB Secondary Cache Module Designed For Use With Intel Pen-tium CPU based system(用于英特尔奔腾处理器系统56KB二级高速缓冲存储器)
512KB Secondary Cache Module Designed For Use With Intel Pen-tium CPU based system(用于英特尔奔腾处理器系统12KB二级高速缓冲存储器)
|
GSI Technology
|
| MZS1220-33 MZS1206 MZS1206-33 MZS1210-33 MZS1215-3 |
Equipment Designed to Conform EMI Regulations Such As VCCI /CISPR /FCC /VDE /etc
Equipment Designed to Conform EMI Regulations Such As VCCI,CISPR,FCC,VDE,etc 设备设计符合EMI规范，如VCCI，CISPR，催化裂化，德国VDE
|
M.G. Chemicals
LAMBDA[DENSEI-LAMBDA]
http://
|
| SF2039B-2 |
Designed for SDARS IF Receiver
|
RF Monolithics, Inc
|
| SSGM640200 SSGM120100 SSGM720101 SSGM740101 SSGM76 |
2 to 10 Circuits-designed Type
|
ALPS ELECTRIC CO.,LTD.
|
