| PART |
Description |
Maker |
| 2SD2248 |
NPN EPITAXIAL TYPE (HAMMER DRIVE, PULSE MOTOR DRIVE APPLICATIONS FOR INDUCTIVE LOAD DRIVE)
|
TOSHIBA[Toshiba Semiconductor]
|
| 2SD2248 E001170 |
HAMMER DRIVE, PULSE MOTOR DRIVE APPLICATIONS FOR INDUCTIVE LOAD DRIVE
From old datasheet system
|
Toshiba
|
| TDA5147K |
12 V Voice Coil Motor VCM driver and spindle motor drive combination chip
From old datasheet system
MOTOR CONTROLLER,LDCC,52PIN
|
PHILIPS[Philips Semiconductors]
|
| 2SD2204 |
HIGH POWER SWITCHING APPLICATIONS HAMMER DRIVE, PULSE MOTOR DRIVE APPLICATIONS
NPN TRIPLE DIFFUSED TYPE (HIGH POWER SWITHCING, HAMMER DRIVE, PULSE MOTOR DRIVE APPLICATIONS)
|
TOSHIBA[Toshiba Semiconductor]
|
| 2SD1224 E001102 |
NPN EPITAXIAL TYPE (PULSE MOTOR DRIVE, HAMMER DRIVE, SWITCHING, POWER AMPLIFIER APPLICATIONS)
From old datasheet system
PULSE MOTOR DRIVE, HAMMER DRIVE APPLICATIONS SWITCHING APPLICATIONS POWER AMPLIFIER APPLICATIONS
|
Toshiba Semiconductor
|
| LV8136V ENA2005-D |
Bi-CMOS IC For Brushless Motor Drive Direct PWM Drive, Quiet Predriver IC
|
Sanyo Semicon Device
|
| IRAMS10UP60A IRAMS10UP60A05 |
PLUG N DRIVE INTEGRATED POWER MODULE FOR APPLIANCE MOTOR DRIVE
|
International Rectifier
|
| STK672-120 |
Aluminum Polymer Radial Lead Capacitor; Capacitance: 2200uF; Voltage: 2.5V; Case Size: 8x12 mm; Packaging: Bulk
Two-Phase Stepping Motor Driver (Square Wave Drive) Output Current: 2.4 A
Thick-Film Hybrid IC
Unipolar Fixed-Current Chopper (Self-Excited PWM) Scheme and Built-in Phase Signal Distribution IC Two-Phase Stepping Motor Drive (Square Wave Drive) Output Current: 2.4 A
|
Sanyo Electric Co.,Ltd.
Sanyo Semicon Device
|
| 2SK296706 2SK2967 |
Silicon N Channel MOS Type DC−DC Converter, Relay Drive and Motor Drive Applications
|
Toshiba Semiconductor
|
| 2SK2963 |
N CHANNEL MOS TYPE (HIGH SPEED, DC-DC CONVERTER, RELAY DRIVE AND MOTOR DRIVE APPLICATIONS)
|
Toshiba Semiconductor
|
| 2SK286206 2SK2862 |
Silicon N Channel MOS Type DC−DC Converter, Relay Drive and Motor Drive Applications
|
Toshiba Semiconductor
|
