| PART |
Description |
Maker |
| A1140 A1140ELH A1140EUA A1140LLH A1140LUA A1143EUA |
Two-Wire, Factory-Programmed, Chopper-Stabilized, Unipolar Hall-Effect Switch
|
Allegro MicroSystems
|
| MAX6665 MAX6665ASA40 MAX6665ASA45 MAX6665ASA50 MAX |
Fan Controller/Driver with Factory-Programmed Temperature Thresholds
Fan Controller/Driver with Factory- Programmed Temperature Thresholds SPECIALTY ANALOG CIRCUIT, PDSO8
|
MAXIM - Dallas Semiconductor
MAXIM[Maxim Integrated Products]
Maxim Integrated Products, Inc.
|
| XOPL91050UC XOPL91100UC XOPL91100UD XOPL91100UI XO |
FACTORY PROGRAMMED OSCILLATORS
|
EUROQUARTZ limited
|
| UPG2214TB-E4-A |
50 MHz - 3000 MHz RF/MICROWAVE SGL POLE DOUBLE THROW SWITCH, 0.65 dB INSERTION LOSS
2-WIRE FACTORY PROGRAMMED W/TIN PLATING
NECs W LOW VOLTAGE L/ S-BAND SPDT SWITCH
NECs ?W LOW VOLTAGE L, S-BAND SPDT SWITCH
|
NEC Corp.
|
| JPO53-2.5V JPO53-3.3V |
Programmed SMD CMOS Oscillator
|
Jauch Quartz Gmbh
|
| MLX90290LUAAAA-XYZBU MLX90290LSEAAA-XYZRE |
High Speed Programmed Linear Hall IC
|
Melexis Microelectronic...
|
| E8415A |
1GHz Dual Channel, Digitally Programmed Pin Electronics Solution
|
Semtech Corporation
|
| GP2D150A GP2D150AJ00F |
Factory set trigger point: 15°
|
Sharp Electrionic Components
|
| SI51218 |
THREE OUTPUTS FACTORY PROGRAMMABLE CLOCK GENERATOR
|
Silicon Laboratories
|
| 52500-LW-TTT 52500-SP-TTT |
HEATER, 18V, 9W, FACTORY SET TEMPERATURE
|
Micropac Industries
|
| R191-052-000 |
Enclosures can be Factory Modified ( Milling, Drilling, Printing etc. )
|
Hammond Manufacturing L...
|
| R190-172-000 |
Enclosures can be Factory Modified ( Milling, Drilling, Printing etc. )
|
Hammond Manufacturing L...
|
