| PART |
Description |
Maker |
| 2N3811 |
Type 2N3811 Geometry 0220 Polarity PNP
Type 2N3811 Geometry 0220 Polarity PNP
|
SEMICOA[Semicoa Semiconductor]
|
| 2N5109 |
Type 2N5109 Geometry 1007 Polarity NPN
Type 2N5109 Geometry 1007 Polarity NPN
|
Semicoa Semiconductor
|
| 3DD5287-O-A-N-D |
CASE-RATED BIPOLAR TRANSISTOR FOR TYPE 3DD5287 FOR LOW FREQUENCY
CASE-RATED BIPOLAR TRANSISTOR FOR TYPE 3DD5287 FOR LOW FREQUENCY
|
JILIN SINO-MICROELECTRONICS CO., LTD.
|
| BM-7A BM-7AN |
8.2×8.2mm Max.(L×W),8.0mm Max. Height(BM-7A,Shielded Type)
8.2】8.2mm Max.(L】W),8.0mm Max. Height(BM-7A,Shielded Type)
8.2.2mm Max.(L】W),8.0mm Max. Height(BM-7A,Shielded Type)
|
SUMIDA CORPORATION.
|
| CD54HC573 CD74HC573 |
<font color=red>[Old version datasheet]</font> OCTAL TRANSPARENT D-TYPE LATCHES
|
TI store
|
| SNJ54LS377J SNJ54LS377W SN74LS377N3 SN74LS377NE4 S |
<font color=red>[Old version datasheet]</font> OCTAL, HEX, AND QUAD D-TYPE FLIP-FLOPS
|
TI store
|
| SN74LV373ADBR SN74LV373ADBRE4 SN74LV373ANSRE4 |
<font color=red>[Old version datasheet]</font> OCTAL TRANSPARENT D-TYPE LATCHES WITH 3 STATE OUTPUTS
|
TI store
|
| SN74HCT377NE4 |
<font color=red>[Old version datasheet]</font> OCTAL D-TYPE FLIP-FLOPS WITH CLOCK ENABLE
|
TI store
|
| SN74ALS563B SN74ALS563BN SN74ALS563BDW |
<font color=red>[Old version datasheet]</font> OCTAL D-TYPE TRANSPARENT LATCHES WITH 3-STATE OUTPUTS
|
TI store
|
| TUSB544I TUSB544IRNQR TUSB544IRNQT TUSB544RNQR TUS |
<font color=red>[Old version datasheet]</font> USB TYPE-C 8.1 Gbps Multi-Protocol Linear Redriver
|
TI store
|
| SN74LVCH16374AZQLR |
<font color=red>[Old version datasheet]</font> 16-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH 3-STATE OUTPUTS
|
TI store
|
