| PART |
Description |
Maker |
| GL390 GL390V |
Thin Bow Type Resin Mold Package Infrared Emitting Diodes
|
Sharp Corporation
Sharp Electrionic Components
|
| 5P6SMA 5P4SMA |
5A mold isolated SCR
From old datasheet system
P gate all Diffused mold type Thyristor granted 5 A on-state Average current, with rated Voltages up to 600V
|
NEC Electronics
NEC[NEC]
NEC Corp.
|
| AC05DSMA |
5A resin insulating TRIAC
5 A RESIN INSULATION TYPE TRIAC
|
NEC
|
| HSDL-4250 HSDL-4251 |
High Performance T-1 3/4 (5mm) AlGaAs Infrared (870nm) Lamp 5 mm, 1 ELEMENT, INFRARED LED, 870 nm
High-Performance T-1 ? (5mm) AlGaAs Infrared (870nm) Lamp
High-Performance T-1 ? (5mm) AlGaAs Infrared (870nm) Lamp
|
Lite-On Technology, Corp.
Avago Technologies, Ltd.
AVAGO TECHNOLOGIES LIMITED
|
| P1395-01 P2478-01 P2405 |
Resin coating.dual type
Resin coating.dual type 树脂coating.dual类型
|
HAMAMATSU[Hamamatsu Corporation]
Hamamatsu Photonics K.K.
|
| RPI-122 A5800739 RPI122 |
Photointerrupter/ double-layer mold type
PHOTOINTERRUPTER, DOUBLE-LAYER MOLD TYPE
From old datasheet system
|
Rohm CO.,LTD.
|
| PS21312 |
Dual-In-Line Package Intelligent Power Module TRANSFER-MOLD TYPE INSULATED TYPE
|
Mitsubishi Electric Corporation
|
| PS21993-4 PS21993-4A PS21993-4C PS21993-4W |
Dual-In-Line Package Intelligent Power Module TRANSFER-MOLD TYPE INSULATED TYPE
|
Mitsubishi Electric Semiconductor
|
| SR3517-B SR3517-H |
Red colored diffusion lens type 3mm(T-1) all plastic mold type High luminosity 红色的扩散镜头类型毫米（翻译- 1）的塑料模具型高亮度
|
AUK, Corp.
AUK corp
|
