| PART |
Description |
Maker |
| TCM811 TCM811FERC TCM811LERC TCM811MERC TCM811RERC |
The TCM811 and TCM812 are cost-effective system supervisor circuits designed to monitor VCC in digital systems and provide a reset signal to the host processor when necessary. A manual reset input is provided to override the reset monitor,
4-Pin Microcontroller Reset Monitors
|
MICROCHIP[Microchip Technology]
|
| ASM811SEUS ASM811TEUS ASM811 ASM812 ASM812TEUS ASM |
4 Pin P Voltage Supervisor with Manual Reset 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO4
4 Pin P Voltage Supervisor with Manual Reset 4引脚P的电压监控，带有手动复位
4 Pin µP Voltage Supervisor with Manual Reset
Low Power CPU Supervisors
From old datasheet system
4.38 V, 4 pin mP supervisor with manual reset
2.93 V, 4 pin mP supervisor with manual reset
4 V, 4 pin mP supervisor with manual reset
3.08 V, 4 pin mP supervisor with manual reset
2.63 V, 4 pin mP supervisor with manual reset
4.63 V, 4 pin mP supervisor with manual reset
|
Alliance Semiconductor Corp...
Alliance Semiconductor, Corp.
ETC[ETC]
ALSC[Alliance Semiconductor Corporation]
|
| MAX792 MAX792CPE MAX792CSE MAX792EJE MAX792EPE MAX |
Microprocessor and non-volatile metory supervisory circuit. Reset threshold 4.62V. Reset and low-line threshold accuracy -2%
Microprocessor and non-volatile metory supervisory circuit. Reset threshold 4.37V. Reset and low-line threshold accuracy -2%
Microprocessor and non-volatile metory supervisory circuit. Reset threshold 2.61V. Reset and low-line threshold accuracy -2%
Microprocessor Voltage Monitors with Programmable Voltage Detection
Dual D-type Positive-Edge-Triggered Flip-Flops With Clear And Preset 14-CFP -55 to 125 微处理器和非挥发性内存监控电
Microprocessor and Non-Volatile Memory Supervisory Circuits
From old datasheet system
Microprocessor and non-volatile metory supervisory circuit. Reset threshold 3.06V. Reset and low-line threshold accuracy -2%
|
MAXIM - Dallas Semiconductor
Maxim Integrated Products, Inc.
MAXIM[Maxim Integrated Products]
|
| MAX801 MAX801CPA MAX801CSA MAX801EPA MAX801ESA MAX |
Supervisory circuit with -1.5% reset accuracy. Reset threshold(typ) 4.425V. Watchdog.
Supervisory circuit with -1.5% reset accuracy. Reset threshold(typ) 4.675V. Watchdog.
Supervisory circuit with -1.5% reset accuracy. Reset threshold(typ) 4.575V. CMOS RAM write protection..
8-Pin µP Supervisory Circuits with ±1.5% Reset Accuracy
8-Pin µP Supervisory Circuits with ±1.5% Reset Accuracy
8-Pin μP Supervisory Circuits with ±1.5eset Accuracy
8-Pin P Supervisory Circuits with 1.5eset Accuracy
From old datasheet system
8-Pin レP Supervisory Circuits with 【1.5eset Accuracy
5015 RR 3#8 SKT RECP
8-Pin レP Supervisory Circuits with 1.5eset Accuracy 8引脚レP监控电路与精度1.5eset
8-Pin レP Supervisory Circuits with 1.5eset Accuracy 8引脚微处理器监控电路，提amp;plusmn;1.5%的复位门限精
Interface IC 1-CHANNEL POWER SUPPLY SUPPORT CKT, CDIP8
Supervisory circuit with -1.5% reset accuracy. Reset threshold(typ) 4.575V. Watchdog.
Supervisory circuit with -1.5% reset accuracy. Reset threshold(typ) 4.675V. CMOS RAM write protection..
|
MAXIM - Dallas Semiconductor
MAXIM[Maxim Integrated Products]
Maxim Integrated Products, Inc.
|
| S24022 |
Precision RESET Controller and 2K I2C Memory With Both RESET and RESET Outputs
|
Summit Microelectronics, Inc.
|
| MM1106 |
System Reset (with watchdog timer battery back-up)
From old datasheet system
|
MITSUMI
|
| PST621 PST620 |
From old datasheet system
System Reset (with battery back-up) Monolithic IC
|
MITSUMI[Mitsumi Electronics, Corp.]
|
| 12LCT 63LET 355LMT 50LET 35LET 315LMT |
4-Pin SC70 Microprocessor Reset Circuits with Manual Reset Input
Microprocessor Supervisory Reset Circuits with Edge-Triggered, One-Shot Manual Reset
Fuse 保险
|
TE Connectivity, Ltd.
|
| MCP809 MCP809T-270I_TT MCP809T-300I_TT MCP809T-315 |
1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3
The MCP809 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ...
The MCP810 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ...
The MCP810 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d
The MCP809 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d
MICROCONTROLLER SUPERVISORY CIRCUIT WITH PUSH-PULL OUTPUT
|
Microchip Technology Inc.
|
| SA56614-XX SA56614-XX_3 |
CMOS system reset
From old datasheet system
|
Philips
|
| AME8500AEETBF29 AME8500AEETDD46 AME8500BEETDD46 AM |
Reset time: 210mS; micropower uP reset device
Reset time: 30mS; micropower uP reset device
Reset time: 1.5mS; micropower uP reset device
Reset time: 150mS; micropower uP reset device
|
AME
|
