Part Number Hot Search : 
88HFR120 LF12CV5V AS5147P HV9608 220AB SC925 204S1 36430
Product Description
Full Text Search
  grease Datasheet PDF File

For grease Found Datasheets File :: 4095    Search Time::1.375ms    
Page :: | 1 | 2 | 3 | 4 | <5> | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 |   

    PS21963-S

Mitsubishi Electric Semiconductor
Part No. PS21963-S
OCR Text ....7 4.5 Unit C/W C/W Note 3 : grease with good thermal conductivity should be applied evenly with about +100m~+200m on the contacting surface of DIP-IPM and heat-sink. The contacting thermal resistance between DIP-IPM case and heat sink (...
Description 600V/10A low-loss 5th generation IGBT inverter bridge for three phase DC-to-AC power conversion

File Size 88.83K  /  8 Page

View it Online

Download Datasheet





    STD03P STD03N

http://
Allegro MicroSystems
Part No. STD03P STD03N
OCR Text ...k. Remarks About Using Silicone grease with a Heatsink * When silicone grease is used in mounting this product on a heatsink, it shall be applied evenly and thinly. If more silicone grease than required is applied, it may produce stress. * ...
Description Darlington Transistors for Audio Amplifiers

File Size 360.39K  /  7 Page

View it Online

Download Datasheet

    V23990-P543-A38-PM V23990-P543-A39-PM V23990-P543-C38-PM V23990-P543-C39-PM V23990-P543-X3X-D4-14

Vincotech
Part No. V23990-P543-A38-PM V23990-P543-A39-PM V23990-P543-C38-PM V23990-P543-C39-PM V23990-P543-X3X-D4-14
OCR Text ...eatsink per chip r thjh thermal grease thickness 50um = 1 w/mk 1,8 9 k/w tj=25c 5 5,8 6,5 tj=150c tj=25c 1 1,59 2,2 tj=150c 1,78 tj=25c 0,08 tj=150c tj=25c 350 tj=150c tj=25c 15 tj=150c 14 tj=25c 11 tj=150c 14 tj=25c 155 tj=150c 170 tj...
Description Industrial drives Embedded drives

File Size 818.58K  /  23 Page

View it Online

Download Datasheet

    V23990-P543-A28-PM V23990-P543-A29-PM V23990-P543-C28-PM V23990-P543-X2X-D4-14

Vincotech
Part No. V23990-P543-A28-PM V23990-P543-A29-PM V23990-P543-C28-PM V23990-P543-X2X-D4-14
OCR Text ...eatsink per chip r thjh thermal grease thickness 50m = 1 w/mk 2,1 0 k/w tj=25c 5 5,8 6,5 tj=150c tj=25c 1 1,59 2,2 tj=150c 1,78 tj=25c 0,08 tj=150c tj=25c 350 tj=150c tj=25c 15 tj=150c 14 tj=25c 11 tj=150c 14 tj=25c 155 tj=150c 170 tj=...
Description Industrial drives Embedded drives

File Size 930.77K  /  23 Page

View it Online

Download Datasheet

    CTLD-6206S

Sanken electric
Part No. CTLD-6206S
OCR Text ... remarks a bout using silicone grease with a heatsink ? when silicone grease is used in mounting the product s on a heatsink, it shall be applied evenly and thinly. if m ore silicone grease than required is applied, it may produc...
Description Fast Recovery and High Power Diode

File Size 434.32K  /  7 Page

View it Online

Download Datasheet

    CTLD-4204S

Sanken electric
Part No. CTLD-4204S
OCR Text ... remarks a bout using silicone grease with a heatsink ? when silicone grease is used in mounting the product s on a heatsink, it shall be applied evenly and thinly. if m ore silicone grease than required is applied, it may produc...
Description Fast Recovery and High Power Diode

File Size 483.61K  /  7 Page

View it Online

Download Datasheet

    V23990-P585-A208-PM V23990-P585-X2X-D2-14

Vincotech
Part No. V23990-P585-A208-PM V23990-P585-X2X-D2-14
OCR Text ...8 mws ns nc na k/w v 50 thermal grease thickness 50um = 1 w/mk 1 500 300 30 0,00043 25 0 480 30 600 collector-emitter saturation voltage collector-emitter cut-off current incl. diode fall time turn-off delay time turn-on delay time ...
Description Industrial drives Embedded drives
   Industrial drives Embedded drives

File Size 1,394.74K  /  24 Page

View it Online

Download Datasheet

    MUBW10-12A6

IXYS Corporation
Part No. MUBW10-12A6
OCR Text ... is measured using 50 m thermal grease) 1 D =0 D = 0.005 D = 0.01 D = 0.02 D = 0.05 D = 0.1 D = 0.2 D = 0.5 0.1 ZthJH[K/W] 0.01 0.00001 0.0001 0.001 0.01 0.1 1 10 0.001 100 t (s) Transient thermal resi...
Description Converter - Brake - Inverter Module (CBI1)

File Size 257.68K  /  8 Page

View it Online

Download Datasheet

    APEX[Apex Microtechnology]
Part No. EK01
OCR Text ...or a thin, even coat of thermal grease to the bottom of the SA01. If grease is from a tube make sure there is no sign separation of solids and liquids. If from a jar, stir it prior to application. 4. Use #14 sleeving to insulate and align a...
Description EVALUATION KIT FOR SA01 PIN-OUT

File Size 198.35K  /  4 Page

View it Online

Download Datasheet

    APEX[Apex Microtechnology]
Part No. EK51
OCR Text ...the PCB foil area using thermal grease. If soldering the heat slug, ideally the PSOP1 should be soldered to the PCB using a solder reflow furnace. If a reflow furnace is not available, a heat plate capable of solder reflow temperatures may ...
Description EVALUATION KIT FOR DF (24-PIN PSOP)

File Size 309.99K  /  2 Page

View it Online

Download Datasheet

For grease Found Datasheets File :: 4095    Search Time::1.375ms    
Page :: | 1 | 2 | 3 | 4 | <5> | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 |   

▲Up To Search▲

 




Price and Availability




 
Price & Availability of grease

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X
1.8717801570892