| |
|
 |
POWERINT[Power Integrations, Inc.]
|
| Part No. |
EPR-48
|
| OCR Text |
...r output current than "reactive dropper" type power supplies High efficiency (>69% over full input voltage range) Less than 1 W input power with 0.5 W load Low no-load consumption (<0.2 W at 265 VAC) Fully protected against open-loop faults... |
| Description |
Engineering Prototype Report for EP48 - 1.4 W Non-Isolated Buck Converter Using LNK304P
|
| File Size |
1,231.84K /
20 Page |
 View
it Online |
Download Datasheet
|
| |
|
|
Electronic Theatre Controls, Inc.
ETC[ETC]
|
| Part No. |
M2000C
|
| OCR Text |
...age through an external voltage dropper resistor.
VS S
Parameter Settings
The M2000C provides for five inputs, which are used to define the operational parameters. The voltage applied on these inputs are converted to 4 (3) bit digita... |
| Description |
PIR Light Controller for 3-Wire Applications
|
| File Size |
199.29K /
5 Page |
View
it Online |
Download Datasheet |
| |
|
|
SUMMIT[Summit Microelectronics, Inc.]
|
| Part No. |
SMH4804
|
| OCR Text |
...g 12V. It is necessary to use a dropper resistor (RD) between the host power supply and the VDD pin in order to limit current into the device and prevent possible damage. The dropper resistor allows the device to operate across a wide range... |
| Description |
-48V Programmable Hot Swap Sequencing Power Controller
|
| File Size |
578.91K /
41 Page |
View
it Online |
Download Datasheet |
| |
|
|
SUMMIT[Summit Microelectronics, Inc.]
|
| Part No. |
SMH4812S SMH4812 SMH4812G
|
| OCR Text |
...g 12V. It is necessary to use a dropper resistor (RD) between the host power supply and the VDD pin in order to limit current into the device and prevent possible damage. The dropper resistor allows the device to operate across a wide range... |
| Description |
Distributed Power Hot-Swap Controller
|
| File Size |
431.70K /
19 Page |
View
it Online |
Download Datasheet |
| |
|
|
TEMIC[TEMIC Semiconductors]
|
| Part No. |
U6044B
|
| OCR Text |
... circuit as shown in figure 2a. dropper resistor, R1, limits the current in case of overvoltage, whereas C1 smoothes the supply voltage at Pin 8. Recommended values are: R1 = 510 W, C1 = 47 mF. In case of figure 1, capacitor, C1, has a valu... |
| Description |
Radiator fan controlled timer
|
| File Size |
97.15K /
7 Page |
View
it Online |
Download Datasheet |
|
Price and Availability
|
