| |
|
 |
Linear
|
| Part No. |
LTC4054L
|
| OCR Text |
...constant-current mode, this pin servos to 1V. In all modes, the voltage on this pin can be used to measure the charge current using the following formula: IBAT = (VPROG/RPROG) * 150 The PROG pin is also used to shut down the charger. Discon... |
| Description |
150mA Standalone Linear Li-Ion Battery Charger with Thermal Regulation in ThinSOT
|
| File Size |
161.53K /
12 Page |
 View
it Online |
Download Datasheet
|
| |
|
|
linear
|
| Part No. |
LTC3809
|
| OCR Text |
... tested in a feedback loop that servos ITH to a specified voltage and measures the resultant VFB voltage. Note 6: Peak current sense voltage is reduced dependent on duty cycle to a percentage of value as shown in Figure 1.
3809f
3
... |
| Description |
No RSENSETM, Low EMI, Synchronous DC/DC Controller
|
| File Size |
231.05K /
24 Page |
View
it Online |
Download Datasheet |
| |
|
|
SIPEX[Sipex Corporation]
|
| Part No. |
SP7615
|
| OCR Text |
.... The voltage at this pin trips servos to the internal bandgap potential. A set resistor can be connected from the ISET pin to ground to generate a reference current for the following current gain stages. A current could alternately be appl... |
| Description |
Four Channel Constant Current LED Driver
|
| File Size |
241.03K /
10 Page |
View
it Online |
Download Datasheet |
| |
|
|
TOSHIBA[Toshiba Semiconductor]
|
| Part No. |
TC9490FA TC9490F
|
| OCR Text |
... function of focus and tracking servos for loop gain, offset and balance. Built-in RF gain automatic adjustment circuit. Built-in digital equalizer for phase compensation. Built-in RAM for digital equalizer for coefficient, and capable of v... |
| Description |
Digital Servo Single-Chip Processor for Use in CD Player
IC,CD-PLAYER PROCESSOR/CONTROLLER,CMOS,QFP,64PIN,PLASTIC
|
| File Size |
174.62K /
15 Page |
View
it Online |
Download Datasheet |
| |
|
|
Linear
|
| Part No. |
LTC1871-7
|
| OCR Text |
... tested in a feedback loop that servos VFB to the reference voltage with the ITH pin forced to a voltage between 0V and 1.4V (the no load to full load operating voltage range for the ITH pin is 0.3V to 1.23V). Note 6: In a synchronized appl... |
| Description |
1MHz, Wide Input Range, No RSENSE Current Mode Boost, Flyback and SEPIC Controller
|
| File Size |
200.66K /
12 Page |
View
it Online |
Download Datasheet |
|
Price and Availability
|
